Menu
What's new
By:
Filters Better Search

Recent content by episyron

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. E

    Diversion Diversion - the Router Ad-Blocker

    I get this with the latest Diversion (on Merlin 384.7_beta2). Does not seem to affect ad blocking though. [: bad number Diversion 4.0.1 by thelonelycoder RT-AC68U (armv7l) FW-384.7 @ 192.168.1.1 (ad-blocking and logging off, stats not available)...
  2. E

    Diversion Diversion - the Router Ad-Blocker

    Yes, that is correct.
  3. E

    Diversion Diversion - the Router Ad-Blocker

    Here it is: #!/bin/sh # DO NOT EDIT this part of the file # # generated by AB-Solution 3.11 if [ -d "/tmp/mnt/usbstick" ];then service restart_dnsmasq logger "AB-Solution added entries via $0" ln -s /tmp/mnt/usbstick/ab-solution.sh /root/ab-solution.sh cp -f...
  4. E

    Diversion Diversion - the Router Ad-Blocker

    I updated AB-Solution to Diversion with port option and after boot noticed that link to /tmp/mnt/usbstick/ab-solution.sh was created into root's home. This comes from /jffs/scripts/post-mount where there is still code block from AB-Solution 3.11. I suppose this block can be removed now? By the...
  5. E

    ASUS RT-N66U Firmware version 3.0.0.4.382.50470

    Just flashed it too, and web gui is working ok. What browser are you using? For me Firefox has been working best for web gui at least in Linux. Try clearing cookies and site data from your browser for 192.168.1.1.
  6. E

    [Release] Asuswrt-Merlin 380.62_1 is now available

    Nevermind, after powering off and on signal levels are OK again.
  7. E

    [Release] Asuswrt-Merlin 380.62_1 is now available

    On RT-N66U in Site Survey Radio column shows 100% signal level for all APs visible. Anyone else having this?
  8. E

    [RT-N66U 380.58] Cannot set channel to 12 or 13 in the 2.4GHz band

    I can confirm now that with 380.59_beta2 in RT-N66U channels 12 and 13 can be selected OK.
  9. E

    [RT-N66U 380.58] Cannot set channel to 12 or 13 in the 2.4GHz band

    OK, thanks! So just have to wait for 380.59 for RT-N66U and hope it works here too...
  10. E

    [RT-N66U 380.58] Cannot set channel to 12 or 13 in the 2.4GHz band

    Thanks for the interesting suggestion. However I cannot change extension channel to above, it returns to below. You seem to have 380.59, fixed there? Can you select 12 or 13 with 20MHz bandwidth?
  11. E

    [RT-N66U 380.58] Cannot set channel to 12 or 13 in the 2.4GHz band

    Actually I have used channel 13 for long time successfully with my clients and a stock ASUS firmware. It is quite nice to have channel 13 available, having 4 non-overlapping channels instead of 3. I had to change the channel as Raspberry Pi 3 didn't support upper channels at first. Well now it...
  12. E

    [RT-N66U 380.58] Cannot set channel to 12 or 13 in the 2.4GHz band

    Hi, I tried to change the control channel to more quiet 13 in the wireless 2.4GHz band, but although 12 and 13 control channels are on the list to be selected, after selecting 13 the control channel changes to Auto (and picks the channel 6) and a channel bandwidth changes from 20Hz to 20/40Hz...
  13. E

    [RT-N66U] Cloudcheck on FW 3.0.0.4.378.9313

    Hi, I have been running a new stock FW version 3.0.0.4.378.9313 now couple of hours and so far so good. But I was wondering if the new Cloudcheck agent feature is any good. So is anybody using it already? Useful?
  14. E

    RT-N66U Firmware version 3.0.0.4.376.2524

    Checked with a wifi analyzer, lucky to be all alone in the 5 GHz band. When setting the control channel to "Auto", RT-N66U selects channel 36 for a channel and a primary channel: RSSI: 0 dBm SNR: 0 dB noise: -86 dBm Channel: 36 BSSID: 50:46:5D:01:33:C4 Capability: ESS ShortPre Supported...
  15. E

    RT-N66U Firmware version 3.0.0.4.376.2524

    No 40MHz bandwith if control channel set to Auto I just noticed that RT-N66U will not go to 40MHz bandwith in 5GHz band if the control channel is set to "Auto". Took some time to figure out why I am getting only half of the bandwith... Anyone else having this? Happens with 3.0.0.4.376.2524, I...
See more
Top