Whatever the source IP is for the device on your network you want to force through your tunnel, give it a name and enter the source IP, then add it. You may want to use a static DHCP assignment in your LAN settings to ensure consistency. All other undefined traffic will not route through your tunnel. If you want to test, get a device with a browser and enter it's IP address in the VPN client config section. Then access a site like ip chicken to see what your externally facing IP address is.
Asuswrt-Merlin 378.53 is now available
- Thread starter RMerlin
- Start date
Whatever the source IP is for the device on your network you want to force through your tunnel, give it a name and enter the source IP, then add it. You may want to use a static DHCP assignment in your LAN settings to ensure consistency. All other undefined traffic will not route through your tunnel. If you want to test, get a device with a browser and enter it's IP address in the VPN client config section. Then access a site like ip chicken to see what your externally facing IP address is.
RT-AC68U
Since flashing to .53, I see VPN > OpenVPN Servers page doesn't display fully - see above. I tried rebooting the router as well as using 3 different browsers on my laptop and I also tried from my iPhone but it's exactly the same. If it's just me, I'd appreciate any suggestions - I also checked the hash of the firmware file before flashing the router.
Attachments
I'm able to view it. This is using latest version of Chrome browser. I was going to suggest flushing the cache but if you've tested across 3 browsers and 2 devices. Perhaps re-uploading the firmware again (even though hash is good).
RMerlin
Asuswrt-Merlin dev
Works for me. Open your browser console, and look for any Javascript error in there.
RMerlin
Asuswrt-Merlin dev
Marsi4eg
Regular Contributor
please RMerlin could you take a look into print server (working via LPR protocol)?
http://www.snbforums.com/threads/asuswrt-merlin-378-52-is-available.23738/page-20#post-179865
It always says that printer is busy, after re-plugging printer it prints ONE task and then says printer is busy etc.
Unfortunatly I didn't use my printer for almost a year or 10 months, and I cannot say from what version of firmware the problem appeared, only what I know - I had very long router uptimes and when I powered up my printer, I was able to print every time, now have to reboot a router or re-plug my printer after every printing task. Maybe it's not printserver bug but something about usb driver which was updated a couple of times within the last year.
Maybe there is a method to force clearing printing queue in the print server..
tomorrow I will roll back to 374.43 which was the latest release in June-August of 2014 when all was OK, and test
http://www.snbforums.com/threads/asuswrt-merlin-378-52-is-available.23738/page-20#post-179865
It always says that printer is busy, after re-plugging printer it prints ONE task and then says printer is busy etc.
Unfortunatly I didn't use my printer for almost a year or 10 months, and I cannot say from what version of firmware the problem appeared, only what I know - I had very long router uptimes and when I powered up my printer, I was able to print every time, now have to reboot a router or re-plug my printer after every printing task. Maybe it's not printserver bug but something about usb driver which was updated a couple of times within the last year.
Maybe there is a method to force clearing printing queue in the print server..
tomorrow I will roll back to 374.43 which was the latest release in June-August of 2014 when all was OK, and test
Last edited:
Mine is on and has been on. No idea what's going on. my scripts are still there as far as I can tell. I don't see anything odd in the logs.
Many thanks for taking the time to check. I was fairly sure it was a Javascript thing until I checked it on my iPhone. I'm glad it's me and not the firmware; knowing that is 99% of the battle. Thanks Merlin and Brill.
RMerlin
Asuswrt-Merlin dev
I have no way of testing this, and since printer compatibility is very much hit-or-miss based on the specific model you use, there's nothing I can do about it.
Marsi4eg
Regular Contributor
Could you please help me with some advise how to force re-detecting usb devices to emulate re-plugging usb printer? If this could be done I would like to make a script for this
SmallNetGuy
Regular Contributor
I am on 53_0 on my RT-AC68U, and my signature shows 1.038
Why all these signatures are so different, does it have anything to do with hardware ID?
RT-87-R on 53_0 and with 1.042 here.
RT-AC3200U with 1.042
1.042 on AC56U with 378.53.
paul464646
Occasional Visitor
HI, I've just upgraded to 378.53 on y RT-N66U, in the change log file within the download package "New" ad blocker! Is this available for RT-N66U, if so were do I find this menu within the router page?
Many thanks in advance for your assistance.
Paul..
Many thanks in advance for your assistance.
Paul..
This feature is only available on the DPI-enabled models (AC56/AC68/AC87/AC3200).
Trying out the ad blocking feature for the first time and knowing its experimental. Pop-up Ad Blocking won't load a couple sites I tested so I left that off. Streaming does seem to get rid of YouTube ads with no I'll effects yet. Pretty cool.
Edit - still seeing some Ads in YouTube.
Edit - still seeing some Ads in YouTube.
Last edited:
Hi again,
I have a 1000Mbit connection to my ISP so when passsing 380Mbit (download) my Core 1 util 100% and only 30% while uploading about 850Mbit. Could it maybe be why you are not getting 100% for Core 1...? What kind of connection do you got?
BR/Christian
Similar threads
Similar threads
Similar threads
-
-
Solved xbox one not able to sign in when connected through router running asuswrt-merlin on an rt-ac5300.
- Started by haxorflakes
- Replies: 5
-
Release Asuswrt-Merlin 386.13 is now available for AC models
- Started by RMerlin
- Replies: 38
-
Beta Asuswrt-Merlin 386.13 beta is now available for AC models
- Started by RMerlin
- Replies: 32
-
-
-
Release Asuswrt-Merlin 386.12_6 is now available for AC models
- Started by RMerlin
- Replies: 168
-
Where to start with automatic scripting for AsusWRT-Merlin
- Started by Undareth
- Replies: 11
-
-
Beta Asuswrt-Merlin 3004.388.6_x test builds (dnsmasq 2.90)
- Started by RMerlin
- Replies: 102
Latest threads
-
Hyperotpic router replacement - will it solve my problem with connection dropping!
- Started by ACME NoLiFe
- Replies: 2
-
-
-
LAN > DHCP List - Manually Assigned Name + Icon DONT SAVE
- Started by copperhead
- Replies: 4
-
Sign Up For SNBForums Daily Digest
Get an update of what's new every day delivered to your mailbox. Sign up here!