[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

Deleted member 27741 · Jul 28, 2015

Ah, I see- I have made the cursor thicker via the ease of access center and that helps a LITTLE bit... But the color "choice" (if there was a choice) for the cursor is abysmal. I think it is just a bit lighter grey than the background?

Changing the caret/pointer color in the ease of access center does not affect the color of that cursor, bummer. This is all in IE11. I guess I will just switch to Chrome, that pesky bugger is white in Chrome!

RMerlin · Jul 28, 2015

000111 said:
Ah, I see- I have made the cursor thicker via the ease of access center and that helps a LITTLE bit... But the color "choice" (if there was a choice) for the cursor is abysmal. I think it is just a bit lighter grey than the background?

Not sure what kind of colour scheme your desktop is using, the background is quite dark here, with a very good contrast with the cursor's color.

Deleted member 27741 · Jul 28, 2015

In chrome the caret looks like that... in ie11-

Yes, that is it between the k and e of like, and it is two pixels wide!

Apparently this is not a universal problem, perhaps exclusively mine.

john9527 · Jul 29, 2015

RMerlin said:
Not sure what kind of colour scheme your desktop is using, the background is quite dark here, with a very good contrast with the cursor's color.

From what I've been able to read, the spec calls for the caret color to be the inverse of the background color. It looks like IE is following the spec (setting the caret to a dirty yellow), while Chrome is ignoring that and setting it to the same as the text color.

I also use IE, so would like to improve this as well. When I can, I'll try some of the tricks I read about to see if I can make it better..

Vortex66 · Jul 29, 2015

Ok so I've been having some issues with Facebook on IPV6 activated. It loads very very slow. If i reboot the router everything is fine. Any thoughts?

john9527 · Jul 29, 2015

Vortex66 said:
Ok so I've been having some issues with Facebook on IPV6 activated. It loads very very slow. If i reboot the router everything is fine. Any thoughts?

Two things you can try....

- If you are using IE as your browser, try Firefox or Chrome (do a google search for 'browser Happy Eyeballs' for the details on why this may help)
- You seem to be in a bad place with RDS (the other RDS users starting working fine with IPv6 even without unchecking the MTU Advertisement option). You could try setting your PPPoE MTU to 1280 and rechecking the Advertisement option.

pendetim · Jul 29, 2015

A question about the VPN keys. The instructions say only copy the key/cert contents between the -----begin and end------ .

When the server certificate was generated, there was a bunch of semi-useful stuff placed in the preamble before the -----BEGIN CERTIFICATE----- data.

Just wondering if the instructions to only use the data between the ------ and the ------ have to do to the max size of the field or there is some other technical reason in how the VPN function parses the data?

slobodan · Jul 30, 2015

BUSIER failure: I have issued the following remotely (by ssh):

echo 1 > /proc/sys/kernel/sysrq
echo r > /proc/sysrq-trigger
echo 1 > /proc/sys/kernel/sysrq
echo e > /proc/sysrq-trigger

At this point the ssh connection stopped, the router has become unresponsive (no ssh, no telnet, no HTTPS web interface, even from LAN, Sixxs tunnel died), it still routes IPv4 traffic, firewall is still active.

This is something like a doom scenario for the router and the only solution was to power off router and then power it on. But this requires physical access to the router, so it cannot be done remotely.

Router: RT-N16 running 374.43_2-13E1j9527.

echo 1 > /proc/sys/kernel/sysrq
echo b > /proc/sysrq-trigger

does reboot the router, but it cannot be issued after Sysrq+e.

Do you have any plan for automatically reviving basic processes like telnetd and dropbear after Sysrq+e? Consider this a feature request.

Nitro · Jul 31, 2015

Hi John

Thanks for your great effort in creating this fork. Having experimented with all the firmwares from Merlin to Asus, I found this to be the best for my needs with regulation mode and power customisations on my ac66u.

Question- does beamforming make any difference, as i noticed the option had been removed from later versions?

I have also noticed something odd in relation to RSSI on 5ghz. Using Band 3 (149+), my signal level is considerably lower than compared to Band 2 (100+). I actually found Channel 34 to have the best range. Very strange!! I am using #a/0 if that makes any difference.

slobodan · Jul 31, 2015

sbailey4 said:
Well did a factory reset this weekend working on a small issue I was having ( turns out not the router) and noticed that the Max TCP connections were reset back to 16387 again not the 300,000 as default that was addressed in this build (or 13j). Something apparently still off at lease for the AC66.

nvram unset ct_max
nvram commit
reboot

razvanu · Aug 1, 2015

john9527 said:
LATEST RELEASE: Update-13E1
14-July-2015
Merlin fork 374.43_2-13E1j9527
Download http://1drv.ms/1uChm3J
============================

New release is up! And hopefully will finally resolve some long standing issues.

The biggest items

Updated OpenSSL to 1.0.2d to pick up a high sev security fix

Fixed connectivity issues for PPPoE/IPv6

Fixed updating to the new DH size on MIPS routers

Fixed impact to IPv6 download speed with QoS enabled

And a few more...please take the time to read thru the first post for a complete list.

Enjoy!

Thanks for update, I've managed to upgrade it and now it's working IPV6, my ISP is RCS-RDS Romania.

sbailey4 · Aug 1, 2015

slobodan said:
nvram unset ct_max
nvram commit
reboot

Well this is configurable in the UI as well. Point being that was a bug that has been around for a while that was addressed in this release. But still didn't seem to work. So I was reporting it basically. But thanks for the info although I am not exactly sure what that will do.

Engineer · Aug 1, 2015

Just a quick thanks to John for keeping this thing going. I had switched to Tomato ARM (I've been a Tomato user for over a decade - old habits die hard) and was noticing lags and other issues. I just went back version 13 of the 'fork' and I couldn't be more happy. Doesn't have as much detail on QOS compared to Tomato but it is so much faster.

IPV6 gets a 9 out of 10 (couldn't keep it going on Tomato) and the 9 may be the result of TWC having issues with IPV6 in many areas including Central Kentucky.

Thanks John....I thought about trying the latest Merlin but it's so hard to move from this when it's running so well!!!

toyz72 · Aug 1, 2015

ive been using asus firmware for sometime now. i would like to give this firmware a go. from what im reading ,there is no issue with ac68r? and is this the latest version?

RogerSC · Aug 2, 2015

The wireless is better on this firmware than it is on latest RMerlin releases on the RT-AC68P. I realize that the 68P is newer than the 68R, but my guess would be that it should be better for the 68R as well. And no problems, everything that I use on this router is working well, including IPv6.

Forgot to mention, yes, this version, v13, is the latest full release version.

john9527 · Aug 3, 2015

john9527 said:
From what I've been able to read, the spec calls for the caret color to be the inverse of the background color. It looks like IE is following the spec (setting the caret to a dirty yellow), while Chrome is ignoring that and setting it to the same as the text color.

I also use IE, so would like to improve this as well. When I can, I'll try some of the tricks I read about to see if I can make it better..

Well, IE refused all attempts to trick it into using a better caret.....so, I made the background darker and then took a little bit of the edge off the text so it wasn't such a glaring contrast (It actually looks better than the screen capture). Will be in the next release.

john9527 · Aug 3, 2015

slobodan said:
BUSIER failure: I have issued the following remotely (by ssh):

echo 1 > /proc/sys/kernel/sysrq
echo r > /proc/sysrq-trigger
echo 1 > /proc/sys/kernel/sysrq
echo e > /proc/sysrq-trigger

At this point the ssh connection stopped, the router has become unresponsive (no ssh, no telnet, no HTTPS web interface, even from LAN, Sixxs tunnel died), it still routes IPv4 traffic, firewall is still active.

This is something like a doom scenario for the router and the only solution was to power off router and then power it on. But this requires physical access to the router, so it cannot be done remotely.

Router: RT-N16 running 374.43_2-13E1j9527.

echo 1 > /proc/sys/kernel/sysrq
echo b > /proc/sysrq-trigger

does reboot the router, but it cannot be issued after Sysrq+e.

Do you have any plan for automatically reviving basic processes like telnetd and dropbear after Sysrq+e? Consider this a feature request.

I'm not sure there is too much I can do when you force terminate all processes (including the watchdog).
But, I had already backported a couple of changes for the next release which add httpd to the watchdog and a 'watchdog' for the watchdog

So hopefully, in most situations, you'll be able to get to the gui to force a reboot.

Deleted member 27741 · Aug 3, 2015

john9527 said:
Well, IE refused all attempts to trick it into using a better caret.....so, I made the background darker and then took a little bit of the edge off the text so it wasn't such a glaring contrast (It actually looks better than the screen capture). Will be in the next release.
View attachment 4224

Sweet. Looks awesome. Not sure why Asus decided on grey for text/radio button/drop down background in the first place, black would have been a better choice globally in the gui.

anontemp123 · Aug 4, 2015

To make sure I'm understanding this correctly, this fork doesn't offer new features/functionality over what is found in asuswrt-merlin. Rather, this fork is intended to fix bugs and keep up-to-date the older 374 code base for those feel later code bases negatively affected performance.

Is that correct-ish?

Blinkyz · Aug 4, 2015

anontemp123 said:
To make sure I'm understanding this correctly, this fork doesn't offer new features/functionality over what is found in asuswrt-merlin. Rather, this fork is intended to fix bugs and keep up-to-date the older 374 code base for those feel later code bases negatively affected performance.

Is that correct-ish?

Exactly

and it rock solid

Thread starter	Title	Forum	Replies	Date
J	How do I use GNUton's fork for my DSL-AX82U please.	Asuswrt-Merlin	6	Feb 15, 2024
Z	Sudden network issues, looking to fully reset my TUF-AX5400 router running Gnuton's Merlin fork	Asuswrt-Merlin	1	Nov 24, 2023
F	[Issue] Flashing With Merlin Fork GNUton 3004.388.4_0 on Zen Wifi XT8	Asuswrt-Merlin	2	Nov 23, 2023
H	Solved xbox one not able to sign in when connected through router running asuswrt-merlin on an rt-ac5300.	Asuswrt-Merlin	5	Apr 12, 2024
	Release Asuswrt-Merlin 386.13 is now available for AC models	Asuswrt-Merlin	38	Apr 7, 2024
	Beta Asuswrt-Merlin 386.13 beta is now available for AC models	Asuswrt-Merlin	32	Mar 28, 2024
	asuswrt-merlin.net Website Site Down?	Asuswrt-Merlin	18	Mar 27, 2024
C	Asuswrt-Merlin 3004.388.6 Memory Leak	Asuswrt-Merlin	13	Mar 24, 2024
	Release Asuswrt-Merlin 386.12_6 is now available for AC models	Asuswrt-Merlin	168	Feb 26, 2024
U	Where to start with automatic scripting for AsusWRT-Merlin	Asuswrt-Merlin	11	Feb 22, 2024

[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

Deleted member 27741

Guest

Asuswrt-Merlin dev

Attachments

Deleted member 27741

Guest

Part of the Furniture

Occasional Visitor

Part of the Furniture

Occasional Visitor

Regular Contributor

New Around Here

Regular Contributor

Occasional Visitor

Senior Member

Regular Contributor

Occasional Visitor

Part of the Furniture

Part of the Furniture

Part of the Furniture

Deleted member 27741

Guest

Occasional Visitor

Senior Member

Similar threads

Similar threads

Sign Up For SNBForums Daily Digest