Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. J

    Is Full Bridge Mode Possible?

    I'm looking to use a spare 66u (running merlin) as a 2nd WAN Link sharing a 3G/4G connection off a Ubquiti Gateway. I "think" I need to put the 66u into Bridge Mode to avoid double NAT etc so the AC66U + 3G/4G modem just appears as a "Modem" to the USG as follows: USG Wan 1 <--> Cable Modem...
  2. J

    USB 3G/4G Sticks - How to get Info?

    FYI doing a "sysinfo" shows some info under "USB Devices" but nothing on the modem stats T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14db Rev= 1.02 S: Manufacturer=HUAWEI_MOBILE S...
  3. J

    USB 3G/4G Sticks - How to get Info?

    Thanks - I had tried to run from a Telnet session but I don't think it is install (or am I doing this all wrong)?
  4. J

    USB 3G/4G Sticks - How to get Info?

    Thanks (this brings back memory of the old modem days...) Anyway, how do you issue AT Commands from Telnet on these Routers to the USB Stick?
  5. J

    USB 3G/4G Sticks - How to get Info?

    I don't see any info in the Merlin GUI on info like Signal Strength / Quality / Band etc of the USB Modems when plugged in. Is there are way of getting this info (even via Telnet etc)? Thanks Nathan
  6. J

    Newbie VPN Q

    I've gone down the OpenVPN option (using TAP) and after a bit of reading and config have my Laptop connected just fine and both with name resolution and shares working fine between it and the other PCs on my network. I am having an issue however with my the connection from my friends PC from...
  7. J

    Newbie VPN Q

    Yes - It was enabled by Default (ASUS Router)
  8. J

    Newbie VPN Q

    Hi, Couple of Newbie Q on VPN, my setup is: - AC68U running Merlin 378.55 - Home Network with mix of Static and DHCP assigned Devices - Windows PC (mostly Win10), No Domain, No local Wins or DNS server, Using Homegroup to provide access on folders between PCs I want to 1) take my laptop on the...
  9. J

    My 87u keeps hanging, any suggestions

    I give up.... pulled it out and and have gone back to the 68U as the 87U just kept hanging, and this was just using it as a router with WiFi turned off (I've now moved all my WAPs to Ubiquiti).
  10. J

    My 87u keeps hanging, any suggestions

    As mentioned I've even turned off all WiFi completely and it still hangs.....
  11. J

    My 87u keeps hanging, any suggestions

    Correct, 378.53 and no dodgy jffs-scripts. I find it hard to believe that additional cooling should be required.... unless there is a design fault with these units.
  12. J

    My 87u keeps hanging, any suggestions

    My 87u (running Merlin's latest including a factory reset and manually entering all details) will hang a few times a week. I lose Internet Access and can not log into the router at all, having to manually reboot it each time. All the lights on the unit however seem fine. I've never had issues...
  13. J

    How to turn off WiFi?

    ...ahhh under "professional --> enable radio" I take it does the trick!
  14. J

    How to turn off WiFi?

    I'm going Ubiquity UniFi Wireless managed APs as I'm over the poor hand off between all my ASUS APs. If I keep my AC87u as my router, how do I turn off the wireless part? Thanks Nathan
  15. J

    Asuswrt-Merlin 378.51 is out

    I'm sill having stability issues with my RT-AC87U where the WAN connection in particular seems to get dropped (+ some issues with wireless not being responsive). I changed to 378.51_newqtn and it has been better but I've lost connection 3 times already today. Here is one complete log set from...
  16. J

    Asuswrt-Merlin 378.51 is out

    Just had my 87u drop my WAN connection and I could not log into it. Had to manually reboot the router. Could be a one off (but it has never happened before). Anyone else seeing any issues like this? Thanks Nathan
  17. J

    Advice : How best to config multiple WAPs ?

    Any advice would be great, I'm looking to config my WAP to: - maximise throughput - minimise dropouts - enable roaming to strongest WAP - have a "guest NW" - focus on "N" clients I have the following setup (all ASUS Routers running Merlin custom FW) to provide coverage in the house and...
  18. J

    Dual WAN Issues (USB Failover) - What I've found

    Since Upgrading to Merlin's Beta Firmware this is now fixed and Failover / Failback now works for me! Thanks Nathan
  19. J

    My Wish for 3/4G dongle support

    FYI - I just retested with a Sierra Wireless, Incorporated AirCard 320U and like my old 180G dongle it is recognised by my ASUS 87u running Merlin's latest Beta Firmware. The Great news as Merlin's Firmware fixed the issue of Failover / Failback not working. :) Thanks Nathan
  20. J

    Airplay - Stability Tips?

    Any tips to improve the stability of Airplay? When using "Airfoil Server" (Win) to send to "Airfoil Speakers" (PC, Android) and native Airplay Hardware Devices. I get some dropped packets (not a big issues) but I then start to lose sync between some of the devices. Sometime I lose a...
Top