Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. J

    Asus DDNS: (ddns_return_code == 'register,203') but still not registering

    Having some issues with the Asus DDNS. I've restarted the router, turned off the DDNS, turned it back on after a reboot, changed the hostname. Still no success. Here's a section from the log: Aug 19 11:29:24 ddns update: ez-ipupdate: starting... Aug 19 11:29:24 ddns update: connected to...
  2. J

    [TUTORIAL]Asterisk on the RT-N66U with Assuwrt & Entware

    I actually ended up pursuing another avenue and then later, losing interest altogether. I did have it configured and working properly on the router so it's possible. This link demonstrates the steps required to set it up as well as the other avenue I ended up using...
  3. J

    [TUTORIAL]Asterisk on the RT-N66U with Assuwrt & Entware

    The end goal (for me), is to use an Asterisk PBX with my Android phone for VOIP calling. I want to cut pbxes.org out of the mix. Since my router is running 24/7, it's the perfect place to put Asterisk. So far I've managed to install Asterisk. I will add an additional section detailing how to...
  4. J

    Can the RT-N66U run UTM? How?

    I've kind of hit a wall here with Snort. I can turn it on and run it as a daemon, but it's not logging anything. I can't even tell if it's doing it's job really. Is there anyone more experienced with Snort that could help?
  5. J

    "Default gateway is unavailable" - constant disconnects

    Have either of you set static DHCP reservations for the computers you're having issues with? I've set a static DHCP reservation for the machine I am having the issue with. I will test it again without the reservation to see if I encounter the same issue.
  6. J

    Can the RT-N66U run UTM? How?

    I've checked there as well, still not able to find them.
  7. J

    Can the RT-N66U run UTM? How?

    After some trial and error, I have Snort running on the RT-N66U. It doesn't seem to have much of an impact on the router's performance...None, in fact. I was getting some errors during launch, they had to do with low memory. I lowered the max_tcp and max_udp values to 9999 as mentioned here...
  8. J

    Can the RT-N66U run UTM? How?

    Yes, I verified their availability before I posted. I was more interested in whether the router hardware could support running one or all of these programs. Additionally, I don't exactly know how to set these up, but I'd like to tinker. A little Googling hasn't turned up anything. I was...
  9. J

    Can the RT-N66U run UTM? How?

    I'd like to see if my RT-N66U could support running the packages required to create a unified threat management device. I've seen firmware available for other Asus routers (Wgl-500 I believe was one) that ran Squid, Snort, DansGuardian, OpenVPN and others. I'm really only interested in Squid...
  10. J

    "Default gateway is unavailable" - constant disconnects

    I would just like to mention that I consistently get this problem as well. My Wireless card is built in. I have a Samsun NP700Z5C-SO1US. It's happened only since I've had the RT-N66U.
  11. J

    Entware after reboot

    You shouldn't have to manually start Transmission. The "/opt/etc/init.d/rc.unslung start" line in the default /jffs/scripts/service-start script should automatically start all of your entware packages at boot. How are you verifying that Transmission isn't already started?
  12. J

    Slow client speeds behind Asus-WRT(Merlin Build)-flashed N66U

    I found this thread while searching for an answer to my speed issues. I'm only getting about 300 -400 kbps down on the Transmission client installed on the router. Its downloading to the internal MicroSD. I'm trying to determine if these speeds should be expected for the MicroSD and if so...
  13. J

    Entware after reboot

    I did remove the asusware and .asusware folders as mentioned in post #8. I even removed the drives and reformatted them in GParted. Still no luck. Not sure what the problem was but I'm sure happy that I'm not having it any longer. I've finally been able to configure the router to my liking...
  14. J

    Entware after reboot

    New router is in and everything is working properly. I was stoked to find the opkg command working properly after a reboot. Transmission is working properly. I'd like to be able to add torrents remotely so I'm looking to provide access to transmission via WAN. Squid afterwards. I only...
  15. J

    Entware after reboot

    Well, by chance I have another RT-N66U arriving today. It's brand new. I plan to open it up immediately to put the MicroSD card in there. Then flash Merlin's firmware and then attempt to install Entware. I had previously installed download master on the current unit. I'm concerned that it...
  16. J

    BW logs not saving after reboot, despite being set?

    What firmware version are you running? I'm having a similar problem where my Entware installation is not recognized after a reboot.
  17. J

    Entware after reboot

    Here are the outputs of executing four mount commands. Looks like the /dev/sdb1 is always mounted as /tmp/mnt/data. Though, I still have suspicions that it's either taking too long to mount or perhaps /opt is not being mounted properly. Mount #1: Reboot. Mount #2: Reboot. Mount #3...
  18. J

    Entware after reboot

    I continue to have issues and I can't figure out why. I have now installed Entware using both methods listed in the Wiki, the easy and included script and the "old" way. It does not matter which method I use to install entware, after a reboot I can no longer call the opkg command. I have...
  19. J

    Entware after reboot

    Thanks Merlin. I missed your posts until now. Before I could read them, I did a clean install. Wiped the NVRAM while powering on, and then again restored to factory defaults from the WebUI. I reconfigured everything and attempted the Entware install. Still the same issue. I noticed that...
  20. J

    Entware after reboot

    I'm wondering if I'm using the services-start script incorrectly or if I haven't fully understood the examples. Can anyone point me in another direction for examples? Are there any relevant logs that I could check?
Top