Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. CaptnDanLKW

    PSA - Check TrendMicro Signature

    Not a big item, but since my system has been stable for a while I have not gone into the device for a few weeks. I did this morning and noticed my TrendMicro Signature was on version 2.388 (Early Feb) and since then, even after updating to 386.12._6 a few weeks ago. A manual check triggered...
  2. CaptnDanLKW

    Simple Route Add Command

    I'd like to be able to reach my Fiber / ONT's internal web server from my internal network. ONT is only a Bridge/Media Converter. It's web page listens on 192.168.0.254; I verified by connecting a laptop directly to it. My RT-AC86U's WAN port is (obviously) plugged into the ONT. My...
  3. CaptnDanLKW

    Scribe Help Tweaking crash.log parameters

    The default crash.log doesn't capture all the events, I'm looking for ideas to enhance it but not pull in stuff it shouldn't. Example - with the occasional asd faults, I end up with the entries below... Ideally the 5 entries that went to the system log should go to crash.log. I was thinking...
  4. CaptnDanLKW

    Scribe Syslog-ng syslog.d filter help

    I'm trying to add the "bsd:" kernel and program sources to the same wlceventd log but cannot figure out the syntax. I used the working filter and added line I'm trying to add the "bsd:" kernel and program sources to the same wlceventd log but cannot figure out the syntax, though I think I'm...
  5. CaptnDanLKW

    Updated my DNS Settings - DoT implications and DNS Rebind Attack message

    I had been using my ISP's DNS, no DOT, and my clients all use DHCP (most have reservations), and my router is the DNS server they use. Now I'm finally looking to increase my privacy (everywhere). Also I just switched to quad 9 in the primary DNS section and also enabled DoT, picking the same...
  6. CaptnDanLKW

    RT-AC86U Thermal Upgrade Guide

    TL;DR Re-did the thermals on my two RT-AC86U with new Thermal Pads AND switch to Copper Pads for the CPU. Temps dropped from 90-95c to 75-76c. This is not a message to rehash the problems, perceived design defect or other opinions about the RT-AC86U. I just wanted a guide like this so I didn't...
  7. CaptnDanLKW

    Scribe Scribe no longer starting - symbol error

    So my wife said she thought the internet was down last night, so I went to check my logs and i found that scribe was not running and did not start after a reboot 4 1/2 days ago. No changes to firmware or any addons, the reboot was to re-do the thermal pads inside the router. Scribe wont start...
  8. CaptnDanLKW

    Block QUIC protocol negotiation

    I am looking to block outbound 443/UDP traffic from my Roku TV. RT-AC86U, HW Accel Enabled. No Skynet, diversion, etc. (as my sig says) My Roku TV has a DHCP lease reservation of 192.168.1.56 I am blocking traffic using this Network Services Filter with these settings. A) Is this the...
  9. CaptnDanLKW

    How is Crashlog.log supposed to work?

    I have only an occasional (dare I say rare) crash but when I do, I can never find /jffs/crashlog.log - as I would expect to find. I see this... May 5 01:05:06 kernel: [JFFS2 DBG] (1) jffs2_sum_write_data: Not enough space for summary, padsize = -427 May 5 01:05:06 kernel...
  10. CaptnDanLKW

    Need VPN Solution for Remote usage

    I've read a lot of threads but still remain unsure what to use (beside some aspect of VPN) or where to start. Dual need. 1) I need to access my elderly mom's network as if I was onsite. My RT-AC86U network is configured as 192.168.1.0/24. Their network is 192.168.2.0/24. I need their side...
  11. CaptnDanLKW

    Scribe Logging stopped - for no reason

    Since 386.2_2 things have been stable with my setup since a fresh install with the latest. I've ignored my router for 4-5 days, I went in this morning just to scan the logs and see if any issues were logged. Logging Stopped 5 days ago. So frustrating. I was away on Saturday, we had a number of...
  12. CaptnDanLKW

    Scribe Logging stops after changing Router System settings

    I've noticed that logging is stopping after I sometimes change/save a setting in the System section. For example, I turned off DNS monitoring in the System. I know this bounces a few services, etc. However I know I have an issue when I see this as the last item logged. Mar 23 11:46:40...
  13. CaptnDanLKW

    Issue since starting over - 386.1_2

    At random, multiple times each day my log shows what appears to be a WAN bounce. Because of the randomness I'm not able to watch and see if the WAN LED goes Red. I have no speed or latency performance issues, I don't see my work VPN connections reestablished, no streaming is ever interrupted...
  14. CaptnDanLKW

    v386.1_2 Fresh Config from Scratch

    (edited to simplify my TL;DR original post) I've done a couple a couple of full resets and manual reconfigs over the past month. Both with v386.1_2 and v386.2b2 to test some variations. @RMerlin I think there's a timing or sequence issue with dnsmasq. When wireless restarts, there's this...
  15. CaptnDanLKW

    Entware Entware Mystery

    This is now the 2nd time this has happened. Setup - 2x RT-AC86U in AI Mesh. Scribe, ScribeUI, scMerlin and connmon are the only addons running. I don't stare at my logs all day, but I did log in to check today and noticed by uptime was only 1ish days... and scribe and scribeUI was not...
  16. CaptnDanLKW

    uiScribe Log Goes Here

    I had a odd issue with my RT-AC86U running 384.19 a few weeks back. I only run scribe, scmerlin and conmon. I had not checked the router for a few weeks and when I decided to log in and take a look at the logs, the web interface reverted back to the standard syslog view. In summary, after...
  17. CaptnDanLKW

    First foray into OpenVPN - Help needed

    TL;DR Version - Or my attempt... I'm Installing my old RT-AC68U at my elderly mom's house, want to be able to 'be on her network' from my house / network. My network will is 192.168.1.x/24 (Assumption: The OpenVPN 'Client') Her network will be 192.168.2.x/24 (Assumption: The OpenVPN...
  18. CaptnDanLKW

    Second Thoughts - RT-AC88U to replace RT-AC86U

    I picked up a used RT-AC88U (probably from someone here since it had 384.14_b1 on it). Two benefits are for better range in the house and for the 8 ports. Current config 2x RT-AC86U AI Mesh (Ethernet Backhaul) and Smart Connect ~25 Wifi Clients (6 on Isolated Guest network, they happen to...
  19. CaptnDanLKW

    Different Bootloaders - same Rev RT-AC86U

    Curiosity question about bootloader revs & how they are managed... RT-AC86U #1 HW Rev 1.5 Manufacture Date: 2017 Manufacture location: (not specified) Bootloader (CFE): 1.0.0.7 RT-AC86U #2 HW Rev 1.5 Manufacture Date: 2018 Manufacture location: China Bootloader (CFE): 1.0.0.8 While they were...
  20. CaptnDanLKW

    Help: Run scripts on AI Mesh node

    I have 2 RT-AC86Us both running 384.18. On my main router I'm running syslog-ng and have enabled it to listen remotely, On the remote node I have to manually set nvram "log_ipaddr=192.168.1.1" and restart syslogd after each reboot since this value is not retained, which is my problem. I...
Top