Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. A

    Ubiquiti network or all-in-one router?

    Thank you so much as usual for great advice! I have looked at the AX88 Pro and they seem like good options. I'm definitely ok with 2.5Gbit. A few questions: 1- "wouldn't be considering Ubiquiti. Look for something better if you truly want a solid upgrade": what do you suggest and how would it...
  2. A

    Ubiquiti network or all-in-one router?

    Hi All! I currently have a 3Gbit symmetrical fiber connection at home, with the ISP router connected to my Mesh AX86U system running the latest Merlin firmware (one connected to the ISP router, and the other connected to the first AX86U through the 2.5Gbit port). My home is wired with cat6 Lan...
  3. A

    PS5 port forwarding and VPN rules

    Thank you @ColinTaylor and @RMerlin ! To provide clarity, although it may not change the solution... Activision support is "making me" open ports through either UpnP or manual forwarding, because they're troubleshooting an issue where sometimes my guns don't load correctly in Call of Duty Modern...
  4. A

    PS5 port forwarding and VPN rules

    Hi everyone, I am trying to set up port forwarding on my PS5 for smoother and faster online gameplay. Activision sent me a list of ports to forward, but I don't want to trust their instructions. I have a Mesh system with 2 AX86U using the latest merlin firmware, and my internet connection is...
  5. A

    PS5 Wired LAN - Best Merlin game settings

    Hello, I have an ai Mesh setup with 2 AX86U, and have a PS5 that is connected via LAN. My ISP connection is 1.5gbit/1gbit I am running Merlin 388.2_2. I am curious what the best settings would be for the PS5 when looking at the Game menu (photo attached). Any opinion would be appreciated...
  6. A

    Recommendation on 10Gbe switch

    Thanks TGL. I'm wondering if I should take the dive and go with a UDM pro SE. Connect the Sagemcom directly to the 10G SFP+ wan port, then connect the 10G SFP+ lan port to a ubiquiti 8 port layer 2 switch (USW-Aggregation) for my NAS and wired 10Gbe network, and get 2x acces points U6 Pro access...
  7. A

    Recommendation on 10Gbe switch

    Hmm thanks! And great point @tgl . How would I go about finding unmanaged 10GBE switches that would fit the bill?
  8. A

    Recommendation on 10Gbe switch

    Thank you. Do you recommend a managed or dumb switch?
  9. A

    Recommendation on 10Gbe switch

    Hmmm thanks all! A lot of food for thought here. My main concern is that I went with 2 AX86U routers and quite like their form factor etc. so I want to avoid changing everything... If I keep the routers I'm wondering if I should connect the main router to a switch like the TP Link or the Zyxel...
  10. A

    Recommendation on 10Gbe switch

    Thank you so much @Tech Junky . The only thing I don't understand is how to connect the 5GE USB adapter to the router. Will it reach 5GB speeds through its USB? Either way, here is a diagram of my wired network. Please keep in mind that the ISP's router/modem is not broadcasting Wi-Fi, my AX86U...
  11. A

    Recommendation on 10Gbe switch

    Hello, I currently have a home network that's managed by 2 Asus AX86U routers in mesh on Merlin firmware. My home has CAT6 cabling, and the 2 routers are hardwired via their 2.5Gbe port. I am planning to get a 10Gbe switch so that I can have a quick internal network (file transfer between my...
  12. A

    Improving my Bufferbloat score

    Hey guys, sorry didn't mean to trigger. I've taken down the picture and will do some cable management this week but I just got the service installed from the fiber provider and haven't yet had time to get around to it. However: 1- I had thought about getting Ubiquiti equipment and installing a...
  13. A

    Improving my Bufferbloat score

    Thanks @L&LD ! The Sagemcom gigabit modem/router is connected directly to the pure fiber line. It's also got a 10Gbit ethernet port at the back... I have connected the modem to the ASUS and disabled the wi-fi (it has 2.4, 5 and 6ghz) on it so that the signals won't compete. As you can see, the...
  14. A

    Improving my Bufferbloat score

    Alright so I just got the 1.5 Gbit pure fibre connection and when I test from the Sagemcomm router/modem, it shows a speed of 1.6Gbit down with 1Gbit up. I connected the router to my first AX86U, to which the other mesh unit is hardwired through the 2.5Gbit connection and through which my main...
  15. A

    Improving my Bufferbloat score

    Haha not at all. I just figured that people with weaker routers and connection than what I have now were getting A+ so thought I could do something to optimize my router system through settings. I figured that I can't get full 1.5gbit anyways so let's make it as smooth as possible and fine tune...
  16. A

    Improving my Bufferbloat score

    FYI the option I'm using is "Adaptive QOS"
  17. A

    Improving my Bufferbloat score

    Thanks @Tech9 . So basically once I get my upgrade, you suggest removing all QOS considerations from the Merlin software and that should solve the issues and my bufferbloat score is likely to be different at that point? Obviously I'll try it out, but I'm curious.
  18. A

    Improving my Bufferbloat score

    Thanks all, so I am still a bit confused about what you recommend. As an FYI, I'll be upgrading my connection to 1.5Gbit fiber optic next week, so if reducing the speed to 350 is the solution, I am wondering if there are alternatives? Right now, I am using the built in QOS that's in the QOS menu...
  19. A

    Improving my Bufferbloat score

    Hi everyone, I currently have a home setup with 2 AX86U in mesh, on wired backhaul (cat 6) running Merlin 386.7_2 software. My internet connection is a 400/50 "hybrid" cable internet. I recently ran a bufferbloat test on my hardwired Windows 10 computer (connected directly via Cat6 to the main...
  20. A

    Activating a VPN for a specific port/device (386.7_2)

    The DNS post? I couldn't find the answer to my question... I'm trying to figure out how to get all my other connections to not use the VPN. I played around a bit but couldn't figure it out. Any ideas?
Top