Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Release Asuswrt-Merlin 3004.388.6 is now available

    Has anyone had issues getting more that 20MHz on channels above 100 on 388.6? My router is the AX11000Pro so Tri-Band, not sure if that's anything to do with it? It's completely repeatable as I've gone back to stock and also Merlin 388.5 with full Factory reset and reconfigure in between. I get...
  2. D

    WANFailover Dual WAN Failover ***v2 Release***

    I wasn't getting CPU spikes but I can confirm that the WAN1GWMAC error is gone and also WAN1 is showing a MAC address in the settings too so all looking good.
  3. D

    WANFailover Dual WAN Failover ***v2 Release***

    I've given 2.0.1-beta1 a go and I'm getting a log full of: wan-failover: Debug - failed to set WAN1GWMAC Didn't get this on 1.6. Router debug log attached if that's what you need. Also should I be worried about this warning in the log: wan-failover: WAN Status - ***Warning*** Compatibility...
  4. D

    [ 388.2 alpha Build(s) ] Testing available build(s)

    Looks like Asus finally released 3.0.0.4.388.22525 for the AX11000Pro so hopefully the GPL will be coming your way soon @RMerlin https://rog.asus.com/networking/rog-rapture-gt-ax11000-pro-model/helpdesk_bios/
  5. D

    WANFailover Dual WAN Failover ***v2 Release***

    Since the V2 beta's the option 1 (Status) doesn't work for me, just produces no output and I have to ctrl+c to quit the interface. Everything else seems to work ok though. I tried rolling back to V1.6 and the status works in that version. Router and firmware in my sig.
  6. D

    **SOLVED** GT-AX11000 Pro 10GE led not working

    I haven't had one of these 'quirks' with my Asus routers before (I've had about 5-6 different models over the years), and have been a bit skeptical of the suggestions that they need all this gentle coaxing sometimes get them to behave. I guess I've been lucky but now I've seen it first hand I...
  7. D

    **SOLVED** GT-AX11000 Pro 10GE led not working

    **FIXED** Putting this here for the benefit of anyone else who might experience the same. So, after trying several devices in the 10GE port with it as a LAN port and also trying it with my modem as a WAN port, nothing would make the 10GE light come on. The port itself works just fine at all...
  8. D

    **SOLVED** GT-AX11000 Pro 10GE led not working

    Has anyone noticed the 10GE led not illuminating even when connected to 10gb device? I've got a 10gb switch plugged in and it confirms the port is running at 10gb, the router GUI also confirms it as well as checking syslog when the link comes up. Speeds seem to indicate that it is running at...
  9. D

    Release ASUS RT-AC68U Firmware version 3.0.0.4.386_48262

    Found the changelog & Direct download: Version 3.0.0.4.386.48262 2022/03/25 92.71 MBytes ASUS RT-AC68U Firmware version 3.0.0.4.386.48262 1. Fixed OpenSSL CVE-2022-0778 2. Added more security measures to block malware. 3. Fixed Stored XSS vulnerability. Thanks to Milan Kyselica...
  10. D

    Release ASUS RT-AC68U Firmware version 3.0.0.4.386_48262

    My RT-68U has just updated to 3.0.0.4.386_48262, I spotted the upgrade notification in the web UI. Can't see it live on the Asus website yet though so no info on changes etc at the moment. The numbering has moved on quite a bit though from the last version 46065.
  11. D

    Release Asuswrt-Merlin 386.5 is now available

    Hmm, I think I may have spoken too soon. My 5 Ghz Wifi started to run really slow, I've disconnected all devices and done full power off and uplugged reboot to ensure the radios are powered off which clears the issue briefly but then it slows down to a crawl again, 2.4ghz and wired working just...
  12. D

    Release Asuswrt-Merlin 386.5 is now available

    Dirty upgrade from 386.5 to 386.5_1, just one issue I noticed that QOS became disabled after the upgrade? Turned it back on just fine and running with no other issues.
  13. D

    modmon modmon - WebUI for monitoring Virgin Hub 3 cable modem stats

    @Jack Yaz rebooted after updating and Mormon mounted fine. Back to normal, thanks for fixing so quickly!
  14. D

    modmon modmon - WebUI for monitoring Virgin Hub 3 cable modem stats

    Your scripts have always worked just fine (and are very much appreciated) on my previous AC86U. I've only noticed this one issue with modmon since upgrading to the AX86U, strange isn't it. I'll get the log over as soon as I can.
  15. D

    modmon modmon - WebUI for monitoring Virgin Hub 3 cable modem stats

    Yes, same issue for me also on RT-AX86U runninh 386.1_2. The add on page fails to mount after a reboot. Yes, will do. Can't do it just now as my household are all using the connection.
  16. D

    modmon modmon - WebUI for monitoring Virgin Hub 3 cable modem stats

    Yes, same issue for me also on RT-AX86U running 386.1_2. The add on page fails to mount after a reboot. Not using unbound GUI either. Just spdmerlin, scmerlin and skynet.
  17. D

    [RT-AX86U] Merlin 386.1 - Unable to completely disable upnp

    I don't know if this helps you at all but I observed the same behaviour in the current latest stock firmware beta: Version 9.0.0.4.386.41994. The main regular uPnP setting off but still able to use upnpc client to set port forwarding, in fact several regular devices on my network did as well...
  18. D

    [RT-AX86U] Merlin 386.1 - Unable to completely disable upnp

    So with Regular upnp turned off, should it still be possible for ordinary upnp requests to open ports? That's what I observed just using upnpc command from a Ubuntu box?
  19. D

    [RT-AX86U] Merlin 386.1 - Unable to completely disable upnp

    I guess it'll be any that Asus advertise as having the GeForce NOW support, that's pure speculation though as I don't have other devices to test. Like I said though it isn't just Merlin's build as it's present in the stock firmware for the AX86U going back to the 384 branch too.
  20. D

    [RT-AX86U] Merlin 386.1 - Unable to completely disable upnp

    Yes you're correct, the AC86U doesn't have the "Enable GeForce NOW QoS UPnP control" option/feature. I've come from the AC86U to an AX86U.
Top