Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. mstar

    Release ASUS ZenWiFi XT12 Firmware version 3.0.0.4.388.22127

    I am using fw 2.372 My Current x12 router sw is: 3.0.0.4.388_21678. Latest non beta version is: 3.0.0.4.388_22127 I am too scared to move higher as I don't know if they be unstable or not.
  2. mstar

    AX-11000 160mhz on 5ghz2

    I just set up ky 5ghz-2 to 160mhz and it seems to be working not sure what channel to put on so I put it on 108 but noticed some other networks on channel 100. Would I be getting interference? No idea to test this but it seems why have 160mhz if you can't use it -asus say its fine lol Maybe I...
  3. mstar

    Does the XT12 still has issues? XT12 vs GT-AX11000

    I have the xt12 i was thinking of getting the gt-ax11000. Use the gt-ax11000 as main router and xt12 as the node.
  4. mstar

    Question about upgrading router, for you pro's.

    i went from 1g to 2gig and TBH i noticed no difference to any device. Even a few games the latency/downloads etc nothing to justify the extra money. So now i downgraded to 1gig and its all good. Sometimes you need to ask what is my purpose for higher speeds most house need much less speed...
  5. mstar

    AX88U painful first few days

    regarding the smart plug, i just got a amazon smart plug and it worked. No more messing about and testing firmware. sometimes if its feasible just replace the device (if its not to expensive)
  6. mstar

    Using 160Mhz with RT-AX88U

    i agree i am just testing. Rather than using DFS channels i may try testing on channel 36-48 and see if it makes any difference. I suspect not as i have a few networks which sit on (probably auto channel selection on router) channel 36 and 48. I could try 40(something) see what 160mhz does
  7. mstar

    Release ASUS ZenWiFi XT12 Firmware version 3.0.0.4.388.22127

    cant you just go back a FW version? why return the devices?
  8. mstar

    Using 160Mhz with RT-AX88U

    I am now doing the same. have you ever tried putting to 160mhz? i tried but some reason on wifiMan it still shows 80mhz not sure if the asus router is right (i forced it to 160mhz ) but on wifiman it says 80mhz channel width
  9. mstar

    Channel issue on 5g at 160ghz

    i put to Channel bandwidth 160 MHz and selected Enable 160 MHz AND put control channel to AUTO. however when i look on WIFI MAN it says this network is bandwidth is still 80mhz, is this becuase i have run out of space OR the app is wrong?
  10. mstar

    Channel issue on 5g at 160ghz

    hello all, anybody tell me how i can find interference on channels on asus routers? i tried looking gin wireless log but i am not sure how to spot this? for testing i set my 5g network on 160mhz. The reason i ask is that my 5g network seems to have gone offline? i manually set it to channel...
  11. mstar

    Beta ASUS ZenWiFi Pro ET12 Firmware version 9.0.0.6.102.3506

    i am interested how is this new IoT network work? it basically turns off any special stuff and just basic 2.4g network? is this essentially a renamed guest network?
  12. mstar

    ASUS ZenWiFi XT12 or ET12

    I thought the same to, as its only for the nodes?
  13. mstar

    What's the benefit of enabling the 160hz?

    thanks for confirming in the setting i only have Channel bandwidth - 160mhz so thats why i asked as it doesn;t give me an option of 80/160mhz so hence the question i am not sure what will happen lol
  14. mstar

    What's the benefit of enabling the 160hz?

    Thanks for fhe insight. I am just a newbie into home networking everything I know I learnt from here. As nobody has a network past channel 48 I been playing around seeing if I can get good reliability and speed using 160mhz. Still not sure what a router does if it detects a radar signal does...
  15. mstar

    Doubt with ZenWiFi XT12/ET12 (transformer noise)

    No. My xt12 doesn't.
  16. mstar

    What's the benefit of enabling the 160hz?

    When you said "fall of faster" did you mean lose range quicker than 80mhz? I have since yesterday put my network on 160mhz and not noticed a difference in range BUT in speed saw a jump (it's not a real test tbh so nothing to get excited about, I am only messing about, evaluating 160mhz).
  17. mstar

    MY experiences with over 2 weeks on Asus XT12 -my thoughts.

    Hello all some reason the router (auto) setting went to channel 36 (40mhz) where there is like 3 other networks on and 1 network on channel 48 (my neighbour), and my speed dropped from 800mbps to 350-410, so i put it on channel 52 (80 mhz) again, and speed went up again -i think i read why but...
  18. mstar

    MY experiences with over 2 weeks on Asus XT12 -my thoughts.

    Yes i know i will monitor now. I have just set my channel bandwidth to 80mhz (160 enabled). So much info on here i spend most my time searching lol Still unsure what manually to set the control channel so i set it to 52 (which is the auto setting channel), the neighbours are all on channel...
  19. mstar

    Cannot Connect Some IoT Devices To Internet Via ZenWiFi Pro XT12

    also I disabled Wifi 6 on the 2.4GHz band. Maybe it contributed but it seemed to of worked.
  20. mstar

    Cannot Connect Some IoT Devices To Internet Via ZenWiFi Pro XT12

    Have you reset everything i mean hard reset like it was new? I had the same issues with my smart hubs and IoTs so as i was messing about with the settings i must of put it in a state many could not connect. Here is what i did: 1. Reset everything factory reset 2. connected everything from...
Top