Hi everyone,
I own a RT-AC68U and running with Merlin's 380.58 firmware.
I'm trying to make sense of the output when I do a robocfg show as shown below:
From the output, the ports displayed are Ports 0 to 4 and 8 only. But on the VLANs interface assignment list, I see that there are some VLANs being assigned to Ports 5 and 7.
Could anyone please explain to me why did the VLANs list is showing Ports 5 and 7 while I don't have them listed on the Ports list?
Thanks in advance!
I own a RT-AC68U and running with Merlin's 380.58 firmware.
I'm trying to make sense of the output when I do a robocfg show as shown below:
Code:
admin@(none):/tmp/home/root# robocfg show
Switch: enabled
Port 0: 100FD enabled stp: none vlan: 2 jumbo: off mac: 00:26:75:d3:96:e0
Port 1: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 3: 100FD enabled stp: none vlan: 1 jumbo: off mac: 00:04:4b:80:80:03
Port 4: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:1c:23:0b:8e:a4
Port 8: DOWN enabled stp: none vlan: 2 jumbo: off mac: 00:00:00:00:00:00
VLANs: BCM5301x enabled mac_check mac_hash
1: vlan1: 1 2 3 4 5t
2: vlan2: 0 5
10: vlan10: 0t 5t
56: vlan56: 2 4 7t 8u
57: vlan57: 2t 4 7 8u
58: vlan58: 1t 3t
59: vlan59: 0t 1 3t 7t
60: vlan60: 4 5t 7t 8t
61: vlan61: 7 8t
62: vlan62: 4t 7t 8t
admin@(none):/tmp/home/root#
From the output, the ports displayed are Ports 0 to 4 and 8 only. But on the VLANs interface assignment list, I see that there are some VLANs being assigned to Ports 5 and 7.
Could anyone please explain to me why did the VLANs list is showing Ports 5 and 7 while I don't have them listed on the Ports list?
Thanks in advance!
Last edited: