What's new

QTS 4.2.0 build 1118 update

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

sfx2000

Part of the Furniture
QTS4.2

QTS4.2.0 Build 1118


[Change]
  • Due to the lack of compatibility with DVB-T TV dongles, the Digital TV Station app will be removed from the QTS 4.2 App Center in certain regions. If compatibility improves, then the app will be reinstated.

[Bug Fixes]
  • Fixed an issue where the NAS could not enter hibernation mode if a network cable is unplugged.
  • Fixed an issue where the NAS would display "The File system is not clean." in the system logs after setting up a scheduled shut down. - Fixed an issue where the NAS could not enter standby mode is a network cable is unplugged.
  • Fixed an issue where NAS drives could not enter standby mode if you change the time setting from "Synchronize with ...." to "Manual setting" in the Control Panel.
  • Fixed an issue where the NAS would fail to create scheduled snapshots when using Snapshot Agent Manager.
  • Fixed an issue where if the NAS reboots while a RAID is resyncing (RAID6), the RAID will be inactive after the reboot.
  • Fixed an issue where File Station fails to copy files larger than 30MB from a local device to OneDrive.
  • Fixed an issue where Download Station can still download files with an incorrect proxy setting.
  • Fixed an issue where RAID groups would become "inactive" after rebooting the NAS when the QNAP signature on the disks is missing.
  • Fixed an issue where the TVS-871T would keep trying to recover from an error if it is connected to 2 Thunderbolt devices at the same time.
  • Fixed an issue where the TVS-871T could not establish a Thunderbolt link with a Mac via Thunderbolt cable.
  • Fixed an issue where the TVS-871T may not produce a Thunderbolt IP after updating to a new firmware.
  • Fixed an issue where a TS-871T will fail to reconnect over Thunderbolt after the NAS wakes up from hibernation mode. - Fixed an issue where a 10GbE NIC will be disconnected after the NAS goes into hibernation mode.
  • Fixed an issue where it will fail to open the Credential Manager on Windows 8.1 when the Domain Controller is enabled on the NAS.
  • Fixed an issue where the Next button of "iSCSI Target Only" is disabled while a thin volume is created and its status is "Ready".
  • Fixed an issue where the NAS is unable to backup files with the one-touch button when a Sony SBAC-UT100 card reader is in EXT4 or EXT3.
 
Similar threads
Thread starter Title Forum Replies Date
sfx2000 QTS 5.1.5.2645 build 20240116 QNAP 0
K QTS or QUTS Hero QNAP 1
O QTS admin access rights QNAP 6

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top