Advanced search results
Better search
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: Selected
Results count: 335
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: Selected
Results count: 335
-
- 5 Posts - ptthstrHi everyone, The AX88U Pro has recently added support for VLANs in release version 3.0.0.6.102_21514 (June 6th, 2023). I have two questions related to that: Has the feature been added to Merlin as well? VLANs obviously work in router mode, but are they supported in AP mode? What I mean is: if...
-
J- 6 Posts - jelmdJust downloaded the latest release for an GT-AXE16000-4250 and wondering, why it doesn't contain /www/Advanced_VLAN_Content.asp as well as /www/Advanced_VLAN_DHCP_Content.asp and /www/Advanced_VLAN_Group_Content.asp ? VLAN support is actually the reason, why we bought it. The Asus downloadable...
-
B- 1 Posts - BigScreamSo Ive looked at similar threads, but nothing is concrete in their solutions to achieve what I want to do. I have a Raspberry Pi that is running docker. These docker containers are IPV6 enabled and want to be able to access the IPV6 Internet. For this to happen you need to enable Static Routes...
-
R- 4 Posts - robcaI'm currently using two RT-AC68U with Merlin, one as main router, one as AP with a guest VLAN. I set up my network so that IoT devices with vlan 101 can access the internet but not the main network (vlan 1), and IoT devices on vlan 102 cannot access either internet or main network (but devices...
-
- 1 Posts - ToasterPCHey there! I've been up all night banging my head against this problem. I'm trying to get both a GT-AX11000 and a RT-AX86U (both running Merlin version 3004.388.5_0) to work using a 2.5GbE backhaul for AiMesh in AP mode with separate VLANs for each of the Guest Networks, but so far, the GT has...
-
- 11 Posts - DiveblasterHi I just bought a AXE16000 and installed Merlins latest firmware. I was going to play around with VLAN options that should be found under LAN -> VLAN. I cant find that tab under LAN at all..im using GT-AXE16000_3004_388.5_0_rog_nand_squashfs.pkgtb. Is it hidden or do i need stockfw for that... -
R- 9 Posts - RT-N66UI'm experiencing an issue with my Dynamic Domain Name System (DDNS) not updating when the WAN cable is reconnected on my RT-AC68U router running the latest Merlin firmware. This problem seems to have emerged in the recent firmware releases. To address this issue, I have to manually click 'Apply'...
-
I- 1 Posts - idioterieI have a Asus XT8 running 3004.388.4_0-gnuton1 I added the VLAN setting to support my STB which is on VLID 4: which connects to the STB. All is working perfectly, until I stress my 1Gbit Fiber bandwidth. As soon as I hit approx 20MB/s the VLAN 4 TV signal gets choppy and watching. Any speed...
-
T- 26 Posts - torchddvI have an RT-AX-88U running the latest (3004.388.4) version of Merlin. Wan type is auto IP. I have a couple of guest networks set up already through the GUI. I now have a relative that will be staying long term in a guest cabin and wish to provide him a wired VLAN on physical port 1 only (no...
-
F- 37 Posts - fredmcHi, I've posted a similar thread recently but it was moved and I never did receive any reply, so I'm trying again hoping for any help. As this question is independent of any ASUS model, I ask the mods to keep it in the general forum please. I have an Asus router running Merlin latest firmware...
-
G- 20 Posts - georgevHello all! I'm using an RT-AC86U with Merlin and I would like to have three different wireless networks (all with different SSIDs and passwords): one for trusted devices, one for guests, and one for IoT devices. On the guest and IoT networks, I want all devices to be isolated. At this point...
-
B- 6 Posts - bulgar71Hello everyone, I am a new user on the forum and would like to ask for support. I switched from a Netgear Nighthawk X4S R7800 router with firmware to GT-AX 6000. At this point I am surprised by the lack of VLAN on Asus-Merlin firmware 3004.388.4 So where and how to set Vlan?
-
R- 4 Posts - robcaI have been happily using a guest network to isolate my IoT devices on a separate VLAN across two different RT68U routers with Merlin. For more info, see here https://www.snbforums.com/threads/rt-ac68u-guest-networks-in-ap-mode-using-vlan-and-iptables.64172/ I have now installed a new device...
-
- 9 Posts - SeeJayEmmI have an RT-AC68-U in AP mode running Merlin 386.11. I am trying to segregate my guest network on it's own VLAN. The AC68 is connected via the WAN port to an OpnSense router. I've followed the guidance I've found here on configuring VLANs on the AC68 and believe I have configured it correctly...
-
- 6 Posts - jetonrHi all, New around here, I have been reading through the forums and finally managed to turn my DSL-AC68U into a dumb access point that creates1 IOT wifi, one Guest and the private wifi ( all three have both 2.5GHZ and 5GHZ ). I will add the script below just in case although everything is... -
M- 4 Posts - mmjlmjlI just recieved the RT-AX88U Pro, I was wondering if the VLAN implementation is already available in a Merlin build (either Beta or final)? If not, does anyone have a clue when ASUS will release this in a stable version? I need to decide to go for the ASUS beta firmware or straight to Merlin...
-
D- 25 Posts - DiliMeHi folks, I see here on SNBforums and on Reddit are dozens (or maybe close to hundred) posts about VLANs on Asus Merlin routers, though I haven't found a comprehensive guide/Howto. Anyone can recommend one for my case? My main is AX86S (router mode) and also a second node AC68U that is wired...
-
E- 63 Posts - Eric LiebFinally got it working on the AC86U so figured I would share incase anyone else is interested. In my setup my main network is VLAN 1 Untagged and then VLAN 200 Tagged on the port with the AC86U in AP mode Adopted from https://gist.github.com/Jimmy-Z/6120988090b9696c420385e7e42c64c4 This will...
-
L- 2 Posts - learninghouseMy goal is to setup Home Assistant virtualbox machine to sit on the Asus WRT Merlin 2.4ghz Guest network (I'm assuming the default VID is 501) to isolate from my main network. I could access the Home Assistant frontend page on the VLAN (192.168.101.2:8123) but not from the main network...
-
S- 20 Posts - scryptHello, Newbie here, I am trying to setup a basic home network separating IoT devices and my personal devices. I have a Asus RT-AC68U in Router mode running Merlin firmware 386.10 sitting behind my ISP router as the WAN. I want IoT devices(both wired and wireless) to be on a separate VLAN with...
-
E- 15 Posts - Eric LiebSo I have setup my PFSense and Switch and now working on my AC86U that I want to use for both my main network and a guest network Vlan 1 - Main Network Vlan 200 - Guest network I ran this Which works great for the guest network (it gets tagged as VLAN 200 and everything), but the main...
-
E- 14 Posts - Eric LiebSo I decided to fully change my network to a dedicated opnsense/pfsense router with an 8 port managed switch and using my ax86s and ac86u in ap wireless mode. I still need a wireless guest network so do I have to introduce a 3rd wireless router on its own vlan or is there a way for me to tag a...
-
M- 10 Posts - mooky1977I have this router: RT-AC66U_B1 (base model: RT-AC68U) BCM470x - Cortex A7 ARMv7 revision 0 - Rev. c0 (Cores: 2) Currently running: Merlin firmware 386.10 in AP mode, all SSID's seem to share my default LAN subnet as doled out by my pfSense router's DHCP server, 192.168.3.100+ and there...
-
C- 7 Posts - clvk07Any idea when the vlan feature available on stock firmware will be available on merlin?
-
F- 14 Posts - _Frank_Hi, this is a long/detailed question with the hope to minimize follow-up questions. I’m about to get crazy with this issue and I would really appreciate help. My setup is: ISP -> router running OpenWRT (OpenWrt 21.02.5) -> Trunk (vlan 1, 3t, 4t) -> RT-AC68U (Merlin FW 386.9, AP mode) -> WiFi...
-
S- 2 Posts - sarmenatorI have been trying to get VLANs on multiple SSIDs working on AX58U. I have used the scripts in below links as references https://gist.github.com/Jimmy-Z/6120988090b9696c420385e7e42c64c4 https://virtualize.link/asus-vlans/ I have been able to get the WLAN interfaces work. They function as...
-
R- 24 Posts - rlhWondering if anyone has been able to get IPv6 working using a WAN connection that utilises VLAN? In my country, VLAN tagging with ID 10 is required on the WAN port, with the IP address set using DHCP? I have had a trawl through the forums here but was unable to find any configs that people had...
-
C- 17 Posts - coldheatI've got an asus RT5300 router currently. About to install -Merlin on it but only after I can confirm someone here has actually got VLAN to work... before I go out and buy one of those pfsense boxes. I only see like 2-3 tutorials via google search with no confirmed actions. Damn, wish this was...
-
W- 4 Posts - watergremlin0I know vlan has been a highly requested feature. Now that Asus has offically added it to a few devices, what are the chances of it showing up in Merlin? https://www.asus.com/support/FAQ/1049415/
-
M- 12 Posts - mrblack1134Hi all, I currently have a simple cable modem setup for my internet access: PC <-> [LAN port] RT-AC86U [WAN port] <-> Cable modem <-> Internet I'm tempted to switch to fiber and am told that the provider (Bell/ebox) provides both a Nokia modem (ie. an ONT) and a pre-configured router. I'm...
-
- 46 Posts - puremindHi ! Hoping someone can help... I've recently replaced a Netgear R8500 with a new ASUS GT AX11000 Pro. (Used to have a way older ASUS RT-N66U before with Merlin back then) I am trying to bypass my ISPs router with Asus' directly. For what I read around, it does require to set VLAN 10 in the...
-
A- 2 Posts - Avi16000I'm using Asus GT-AXE16000 What I'm trying to achieve is to connect the outdoor Access Point to the Lan port 3 interface and separate that Lan from accessing the other resources on my network. I'm tried to follow up on the following guide - but no luck, it didn't work. I was able to separate...
-
K- 16 Posts - KhauronDevice: Asus RT-AC68U H/W Ver: E1 S/W Ver: Asus-Merlin 386.7_2 Factory reset done and JFFS formatted and enabled Hey there, can the community help me out here? I'm lost and don't know what to do next. I have the device running fine, but I would want to do VLANs for both, LAN and WIFI. I have...
-
J- 3 Posts - JumpstarterFeature request, webui support for vlans....
-
K- 8 Posts - kyriosMain router : RT-AC3200 with FreshTomato 2021.7 192.168.10.1/24 : for main network (VLAN ID : 1) with DHCP server 192.168.20.1/24 : for guest network (VLAN ID : 3) with DHCP server ---- AP1 = RT-AC68U (AsusWRT-Merlin 386.7_2) Set as AP with IP = 192.168.10.2 WAN Port = Trunk port to main...
-
G- 3 Posts - gorstjWhat is the command to tag all wireless activity on wl1.1 with a VLAN tag? Use scenario: - isolated 5gz guest wifi (wl1.1 on br2) - disabled DHCP for the br2 - DHCP server and gateway is connected to a managed switch on VLAN 502 When I connect to a AIMESH node guest 5gz (i.e. the traffic comes...
-
- 14 Posts - KlavaroHello everyone! I have a RT-AX68U router, and I'd like to set up VLANs and subnets to have a proper DMZ and internal network to build a homelab. I followed this guide https://wu.renjie.im/blog/network/ax88u-vlan/ which helped me set up the basic stuff. Problem is I can't access the GUI nor SSH... -
- 21 Posts - crisagHello friends. Got an issue driving me crazy for a few days already. I have a RT-AC5300 with merlin 386.7_2. Standard configuration done by the web interface. vlan1 with 4 interfaces and br0 created with vlan1. Other vlans are for WAN. No hosts/PCs outside vlan1. One of my hosts can ping any...
-
J- 2 Posts - JaimeZXHey guys! I've been happily running Merlin on my Asus modems for several year now, and built Merlin setups for my mom and in-laws. But now my home router has been a 3200 (no longer supported by Merlin), and anyway it has insufficient LAN ports for my growing home network. So... I've built a...
-
B- 7 Posts - BuffleheadGood morning, My home network uses an ASUS RT-AC86U router, and several Unifi UAP-AC-PRO devices to provide wifi coverage. My Asus router is running Asuswrt-Merlin v386.7. My goal is to create multiple wifi networks on the Unifi devices, mapping to separate tagged Vlans created by my router...
-
Solved Cable Modem->VLAN Tagged Switch->MoCA Adapter->MoCA Adapter->VLAN Tagged Switch->AX86U Router- 54 Posts - GHammerI have a need to get the modem to another floor of a house that does not have the layout to pull ethernet cable from one location to the other. The cable modem also will not get moved as there are no drops in the area the router needs to be in. So, I thought, I'll just use the VLAN WAN... -
- 12 Posts - RimmelAX88U latest firmware - BT Full Fibre UK. I have asked this in another thread but it seems to have been swallowed up by other replies/fault finding. So I am asking the specific question here. Does anyone out there know how to do this? thanks -
S- 10 Posts - SimonPiHello. My ISP requires VLAN-tagging the WAN interface. I've done this through the IPTV tab on the LAN properties page, and it seems to work fine, the router successfully obtains an address via DHCP, but as my title says no traffic actually seems to be routed even though ifconfig shows TX and RX...
-
H- 1 Posts - hyeltonSorry if this has been posted already, So recently I've been needing 2 extra VLANS, Mostly so I can easily seperate my network from my parents (seperate houses connected via fiber) So my parents are not double NAT'd. We have 2 IP's from the ISP so I did have there Eero router connected to the...
-
G- 4 Posts - geoberndI have been ripping my hair out for the last two hours or so (ok - not much hair left anyway...) and hope someone here is smarter than me: I am trying to setup Dual WAN Failover (either the native Asus method or the Dual WAN Failover Script posted in another thread here). My Problem is: The...
-
P- 7 Posts - popcorn9499Hi, So my issue is that I'm trying to use 2 vlans here to create 2 private networks. realistically if I got one of those two working I would be really happy. I have a pfsense box as my router and the vlans are configured on that. I have my netgear r7000 with freshtomato and vlans work perfectly...
-
I- 3 Posts - IgorZI was trying to setup a proper VLAN layout that would match my former network topology (ERX's + Ubiquity APs). I spent 3 full days reading though dozens of threads on this forum only to conclude: there is something REALLY NOT RIGHT about the `vlanctl` tool on my router. It's running the latest...
-
J- 6 Posts - JJay03I am currently running in router mode with a guest ssid running on a separate network from my main network and SSID. If I get another router/firewall can I connect the asus to it and have my guest network and my main network going over this connection to the new firewall. I am guessing that the...
-
- 4 Posts - W3WilkesMy VDSL2 ISP requires a VLAN in their provided modem/router. I want to put the modem/router in transparent bridge mode and provide the PPPoE info in my ASUS router. Is there a way to specify a VLAN id for the WAN port or am I forced to use (waste) one of the LAN ports and configure it as the WAN... -
- 13 Posts - laucienI'm using two RT-AX routers as a mesh and they're both in AP mode with an OPNSense install being my main router/firewall. Is there any way for me to tag the ports and SSIDs on the APs to assign them to specific vlans?. I know there's a lot of threads about implementing VLANs and that there will...
-
- 1 Posts - AndorulLAN port isolation on ASUS RT-AX88U with Asuswrt-Merlin 384.16 stops working can anyone repair? can't delete eth4 from br0: Operation not supported add bridge failed: Invalid argument can't add eth4 to bridge br1: Operation not supported (https://wu.renjie.im/blog/network/ax88u-vlan/) by... -
C- 7 Posts - CaptOnH2OHi all, Please help me understand some of the settings behind VLAN tagging and bridging... I have an AC68U rev1 (running Merlin 386.5_2) Am trying to config as a WAP with: - tagged VLAN50 for WLAN users - tagged VLAN60 for WLAN guests - LAN ports disabled - Web GUI & SSH on the WAN port - WAN...
-
- 10 Posts - MathieuAfternoon folks Up until now I had never dared manipulating the routing table, leaving the necessary changes to be handled by the relevant firmwares/users scripts. But then I came across an issue with IPTV (again). There appears to one entry in the ISP's router table that is not captured by... -
Z- 21 Posts - zingeHello! I wanted to check if this idea made sense/was possible before I break apart my working network and start flashing and reconfiguring things. I currently have an AC86U that I'm using as a router/switch/AP, and an old N66U that isn't currently in use. I have a single ethernet run between my...
-
N- 9 Posts - NodiaqueHello everyone, I have a pfsense router with vlan set on it. I'm using my Asus RT-AC3100 in Access Point Mode since my pfsense router is my DHCP server. Is there a way to assign vlans to specific port on the asus switch and specific vlan on specific ssid (using 4 guest ssid + 2.4/5ghz ssid)...
-
J- 11 Posts - jgarriganHi, I am attempting to convert a RT-AC87U to a pure router with non-blocking/non-altering iptables/ip6tables rules for an internal IT lab. I resolved my problem. I set LAN - Switch Control - "NAT Acceleration" to "Disabled". After I disabled NAT via the web interface the traffic stops...
-
- 3 Posts - drinkingbirdIn the 386 code base, is the best place to configure VLAN and ports (robocfg and brctl) the services-start? I see there are some config files that can be modified (i.e. .conf.add) but not sure if any of them cover that. I want the settings to apply after the ports and VLANs have received their... -
- 4 Posts - StardustHey all. I got fiber internet and are not getting enough info to connect my AX86U directly to to fiber box, but has to use ISP router as a bridge :( I have checked other ISP's, and one of those write that I have top use VLAN 101. 1: Can I do that? 2: If yes - how and where to make these... -
K- 12 Posts - kyriosMain router : RT-AC3200 with FreshTomato 2021.7 192.168.10.1/24 : for main network (VLAN VID : 1) with DHCP server 192.168.20.1/24 : for guest network (VLAN VID : 3) with DHCP server ---- AP2 = RT-N18U (FreshTomato 2021.8) IoT can connect both main wifi and guest wifi and both can have...
-
- 5 Posts - voipbobI am trying to use the VPN Client on my RT-AC86U. When I select the “VPN Director” option for the “Redirect internet traffic through tunnel”, the following are missing on the panel for the VPN Director rules: The “add new rule +” option above the VPN Director rules table. The column titled... -
- 6 Posts - abcxyzHello, Here is my network topology. And I want to access my ISP modem web GUI from PC, laptop... I try to do by following this article but it didn't work: https://github.com/RMerl/asuswrt-merlin.ng/wiki/Access-modem-Web-UI-on-WAN-port-(no-script) Please help me to do this. Thanks in advanced! -
O- 6 Posts - ooferOk, I really thought I was going to figure this out today but massively failed. Here's a preface to what I have and what I'm setting up right now. I have an EdgeRouter X that's acting as my Router, DHCP, firewall, etc. I have an ASUS RT-AC68U flashed with Merlin 386.3_2 that's setup in access...
-
F- 2 Posts - FormBurdenI ended up replacing my Router with Opnsense and turned my two Asus routers into AP mode. And since I’m about to dive into the world of VLANs, very specifically VLAN Tags, the info I sadly cannot find anywhere is if the router is in AP mode, would I still have to create the VLAN Network also on...
-
E- 8 Posts - Er0nHello there, before venturing into the not very friendly field of VLAN setting up on Asus, I'd like to ask to people that already tried about their experience. I did some researches here on the forum and I jumped into quite old VLAN posts, unaswered posts, and speaking frankly, I did not found...
-
- 5 Posts - HearToLearnHi all, Trying to improve my networking skills with switching to pfsense for my router, I'm learning a lot but theres one problem I cannot resolve. I want to setup at least one guest WiFi AP isolated from the rest of the network. I did find an excellent post from @gpz1100 with a bash shell... -
M- 4 Posts - mentaluproarI have a managed switch throwing untagged and 2 tagged VLANs of traffic at my AX86U. The actual routing is done by a nano R4S running OPNsense. Now I want my ASUS router to direct traffic to those 3 destinations based on what SSID a devices is connected to. I want a normal 2.4, a normal 5.0...
-
M- 10 Posts - mikeregHi, Recently I moved and needed to setup my home network again in my new place. I own a Asus RT-AC68U (merlin 386.3_2) and recently got 3 TP-link Deco M4. What is the best way to setup my Asus with the 3 AImesh devices? Also: Recently I had a few times that my Hue lights suddenly turned off...
-
R- 37 Posts - rumi409Hi All, Hoping to get some clarification and solution to my network setup. I currently have a Edgerouter X and a UniFi AP. My network consists of three VLANs (Main, IoT, and Guest). The main Lan can access IoT but the IoT can't access the main Lan. The guest VLAN is isolated but has access to...
-
R- 3 Posts - reddyHi. I'm running good old RT-N66U (currently on 374.43_45ECj9527 LTS Merlin fork, surely need to upgrade to the recent one) and I wanted to set up a VLAN for home security cameras which is completely separated from the main home network (or ideally allow one-way connections, from the main home...
-
- 15 Posts - sn4k3Device: RT-AC88U Current Version : 386.3_2 Recently i'm starting to get a annoying problem where many internet pages stop working, returning the ERR_CONNECTION_TIMED_OUT. After many retries (F5) and some time, page is able to access. And i'm talking about common pages, like google, github...
-
E- 2 Posts - evilroachHi, I'm a freshman with merlin, though I have googled many, I can NOT get the goal I want. What I have: 1. Topmost level router(Linksys WRT1900acs with OpenWRT): physical WAN port connecting to the ISP, physical port LAN1 connecting to my AC68U; 2. Asus-RT-AC68U: physical WAN port connecting to...
-
S- 3 Posts - stephan04Good day, I am a complete newbie to vlans and openvpn and need some guidance. I heard that openvpn slows down network but is that only when I actually vpn from outside or will it slow down the network even when there is no vpn access in progress from outside. Do I use just the edgerouter x ...
-
A- 18 Posts - afreireHi, I'm from Argentina and I've Movistar TV. My problem is that the vlan id are different from the id that have the Movistar Triple Vlan profile. Are there any way to change that IDs? Regards.
-
W- 1 Posts - WifiGhostThanks to a post and members here I converted my robocfg script to vlanctl. While going through it I wanted to know if I should leave this enabled: ethswctl -c hw-switching -o disable I think I got everything else updated and just need to test it out
-
H- 5 Posts - HommerI have my AC86U connected to a T-Mobile glass connection using a TPLink MC220L media converter. The AC86U is configured to route internet and IPTV from two VLANs (see attached screenshot) The issue I'm having; When a TV tuner is active I see a continuous stream of ~40-50Mbit on the router (not...
-
N- 7 Posts - nytwolfI am attempting to introduce a new VLAN (VLAN4, 192.168.4.0/24) to my ASUS RT-AC68U running Merlin 386.2_4. At the moment, I do not want to isolate or otherwise prevent any traffic between this new VLAN4 and the default VLAN1. Please note VLAN1 has the router's default DHCP configuration and in...
-
T- 6 Posts - thewizard1241Hi I have an ax86u router at home on merlin firmware. I have a switch capable of running basic vlans. I basically have a switch connected to the router, and the CCTV NVR connected to that switch which is on its own vlan. Everything else on my network is on wireless. Ive seperated them for...
-
S- 15 Posts - slowpokeFirst time building a home network, I'm trying to separate two devices with vlan, how do I achieve this on AC86U? this is my setup on the switch I created 2 untagged vlans that cannot ping each other, but cant figure out how to assign them different IP addresses?
-
D- 1 Posts - develoxHi, my home network is currently setup like this: Draytek modem <--> business firewall <--> Asus Merlin <--> managed switch <--> unmanaged switch <--> business wireless access various device sales are connected along the way, some cabled some wireless, some trusted and some not. I would...
-
C- 4 Posts - clvk07Is it possible to configure AX86U 386.1 Beta5 with vlans using a netgear managed switch? (GS108Ev3) Basically need to put Reolink Camera NVR on a dedicated VLAN. I tried to create two VLANS, put the reolink NVR on 1 vlan on port 1 on the switch,*UNTAGGED) put all other devices on switch on...
-
C- 3 Posts - collidernew merlin firmware supports one 2.4GHz and one 5GHz guest WiFi sync to aimesh node. This is a great feature. But looks like copy the vlan tag script to aimesh node doesn't work properly. Any idea?
-
C- 4 Posts - colliderWith the following script, I was able to put vlan tag 9, 11, 13 on guest SSID corresponding to wl0.1, wl1.1, and wl0.2. My question is if it's possible to assign vlan tag to main SSID. The reason I want to do this is that only the main SSID can pass to aimesh node but guest SSID can't. robocfg...
-
B- 2 Posts - B1tman1acHi Everyone :cool: Newbie here, Just updated from DD-WRT to AsusWRT-Merlin on my Asus AC3100 and needed a way to setup Multi-SSID with VLANs. I found a script on github, forked it, modified it, tested it and bingo it works. So, thought I would post it here in case others found it useful (& in...
-
G- 1 Posts - gburlingameI'm hoping someone can quickly tell me if an observation I just made is expected or not. I'm running Merlin's 386.1 beta 1 on an RT-AC88U. I connect via SSH and send this command nvram show | grep vlan.*ports | sort This is the response size: 65536 bytes (65536 left) vlan1ports=0 1 2 3 5...
-
E- 1 Posts - ERamsethIt seems like services-start is the right place for the initial VLAN setup script I wrote. Should it also be triggered by other events? And if so does anyone have insight into which one(s)? I'm guessing a service-event-end on something like wireless or networking, but I actually am having...
-
M- 2 Posts - manorI'm trying to get a pair of Asus RT-AC68U to work as Aimesh devices with wired backhaul in a VLAN setup I have with pfsense and a managed switch from zyxel. My configuration is according to the drawing. I use pfsense to manage the VLAN11 via DHCP. All my wifi devices get ips from VLAN11...
-
S- 15 Posts - SpykeYsHi :) I am with Bell Fibe via a Home Hub 2000. My current setup is ONT - HH2000 - Asus AC3100. I am being told there is a way to get rid of the HH2000 and do the PPPOE session directly on the Asus AC3100. But in order to remove the HH2000, I need to do some VLAN 35 tagging on the WAN...
-
- 5 Posts - memphis2kHello, I'm new to tagging VLAN's and need some assistance. Hardware: pfSense in a Hyper-V VM setup with VLAN tagging (1-100) HP V1810 48 Port managed switch RT-AC68U running latest Merlin VLAN's: VLAN 1: (default) everything otherwise specified VLAN 11: Insecure Hardwired (Works) VLAN 21...
-
- 23 Posts - ThePooBurnerHi everyone. I've been scouring this forum for a couple months now looking for information on using VLANs via scripting and trying to make sense of everything that I've read. I'm not making this post lightly, as in most of what i've read there seem to be a lot "You should have searched first... -
R- 1 Posts - roygerHello, I would like to expose a VLAN in the WAN port, so that it can be mapped to the internal router LAN. I have a PLC between the ONT and my router and I would like to be able to connect other devices there into my internal LAN provided they are setup to use the right VLAN. So far I have...
-
M- 24 Posts - mentaluproarI’m setting the network up with a opnsense firewall and switches. I would like to have certain devices, like guests and IoT devices, on a VLAN. Is it possible to do that on my router or is guest networking the best I can hope for?
-
W- 18 Posts - WifiGhostI made a post asking if I could take the custom scripts that I use on my 87U and upload them to the AX3000 ASUS with Merlin 384.18 that I will be upgrading to soon. I now know that robocfg will not be available when I switch over and use the new Asus Merlin as robocfg was swapped out at version...
-
- 18 Posts - siderophobicGreetings, My logs are being flooded by this error "kernel: br0: received packet on vlan1 with own address as source address" and clients are not able to connect to the Wi-Fi. I've read and tried a few things regarding this error like disabling NAT Acceleration, disabling Spanning Tree...
-
- 87 Posts - Bob.DigSo first, I have almost no clue about vlan but I just hope, that what I want is so easy, that someone will help me with that. My AC56U is in AP-Mode connected to a pfSense, which is doing the routing, DHCP, vlan etc. I want that everything connected to the LAN-Ports and to the Wifi is in the... -
R- 7 Posts - Roy360360Hey all, I use my AC68P as an AP, and I'm trying to get VLAN tagging working on it. I've had some success but I think I need some help to complete this. I want router to have the following VLANs: VLAN Physical Ports Wireless 1 (Default) WAN, LAN1, LAN2, LAN3 2.4G / 5G 20 2.4G / 5G 30...
-
S- 6 Posts - Soul_What I am trying to do is: Use my bond0(which is composed of eth3 and eth4) to retain the untagged VLAN1, but tag VLAN2000 and VLAN3100 in addition to it, which are hosted (including their routing interface and DHCP server) on a Fortinet connected on the other side of this bond0. Use VLAN2000...
-
- 2 Posts - KelbesqAfter some effort, I got VLAN tagging working on one of my ASUS AP's running asuswrt-Merlin "working". My setup is: an EdgeRouter 4 an Netgear GS308 unmanaged switch. RT-AC66U_B1 + RT-AC3200, both ASUS products running in AP mode with the latest non-beta Asuswrt-Merlin). I'm using...
-
F- 7 Posts - FmstratHi all, I'm coming from DD-WRT and about to pick up an RT-AX88U and looking at Merlin as an option for it. I have two questions that I'm hoping the community can answer for me. These are things I do now in DD-WRT that I'd like to see if Merlin can handle. 1) VLANs -> From my reading I'm 99%...
-
F- 8 Posts - Frantisek BrabecHi all, I'll try to be brief. I have AC3100 in AP mode with 2 guest WIFIs. I want each guest WIFI to go out over on WAN port on its own VLAN (I am using IDs 9 and 10). To that end, I have /jffs/scripts/services-start script as shown below. When a client connects to WIFI wl0.2, it is assigned...
-
K- 1 Posts - karinadsHi, I just bought Asus RT-AC86U and I'm trying to get rid off my ISP's (Orange) Funbox 2.0. I was able to set up Internet without issues using VLAN 35, but I have big issues with IPTV. The problem is that setup used by Orange is pretty complex. Generally it looks like below: VLAN 35: Internet...
