Recent content by alk630

Just updated to 384.14.2 and the Samsung TV problem switching off and then back on at around three minute intervals returned immediately. Back flashing to 3.83.13 has again fixed the problem. Is there anything I should be looking at to further diagnose this problem?

Both pieces of equipment are connected wirelessly on 2.4 GHz only and we are UK based. This channel is fixed on 11 on both routers and we have a relatively clear neighbourhood of surrounding wifi around us, so interference does not seem to figure in the problem. Thank you for your reply...

I don't know whether this problem is related to the latest version of Merlin's firmware or not, and some may scoff at this. After the latest firmware update to 384.14,on my AC-86U routers, we started experiencing our Samsung TV turning on and then off at regular intervals of around three...

Same problem here using 2 x RT-AC86U with second configured as an AP... did not show under 10_2 either.

There is a multitude of software for precisely this purpose. A good freeware tool is available at: http://www.softperfect.com/products/networx/

Having not really used this feature much in the past, I don't know where or when the following problem/bug crept into the firmware. I noticed it after monitoring my FTP server traffic over a prolonged period of a few hours. When traffic manager is first opened and I switch to the wired view...

I thought that too, that's why I performed a factory reset on the hi-fi, but the old media devices still show up! Thanks for the reply anyway.

At various times over the last year I have connected wirelessly to three separate DLNA media devices via an Arcam Solo Neo hi-fi and have now settled with using just one of these - an Assett uPNP server. I have now got rid of the first two laptops which contained my first two Windows 7...

This would be a really nice option to have. I suffered the same problem some time ago with my media collection, but realised the problem at the time and also moved the database location.

_sw_mode = '1'; wlc_state = ''; wlc_sbstate = ''; wlc_scan_state = '3'; _wlc_ssid = ''; aplist = [["2G","sevenseven","11","WPA2PSK","AES","23","xx:xx:xx:xx:xx:xx","bgn","0"]]; That SSID is unmodified, the MAC address is disguised to protect privacy.

Consistently gives me in both Chrome 27 and IE 10: 3

Can you post your settings, as in the two posts above please?

2.4 Ghz wireless general settings: SSID: 8 characters long, comprising of: (). and upper & lower case letters Hide SSID: No Wireless mode: Auto (only b/g Protection: ticked) Channel Bandwidth: 20/40 MHz Control Channel: 6 Extension Channel: Auto Authentication: WPA2-Personal WPA Encryption: AES...

I have exactly the same behaviour as SCircuit too.

Did as you said, but the scan never finishes on the survey page, just an endlessly spinning activity indicator... and, there are no error messages in the console even after waiting for a few minutes. The only lines displayed are: 'Document was loaded from Application Cache with manifest...