Recent content by Andrea F11

I dont know you because i'm new here, but I wish you'll be better soon!

many thanks to you for your invaluable help

a question: I see that browsers of PCs that are not locked, often make the page refreshes. for example if you are in the configuration page of Asus Router, after just comes out and asks me to authenticate again

GREAT john!! IT WORKS

in fact I had not done: I do it now and then reboot ok?

thx john Here the changes i made: admin@NetworkDrive:/jffs/scripts# cat firewall-start #!/bin/sh iptables -I FORWARD 1 -s 192.168.2.101 -o eth0 -j DROP iptables -I FORWARD 2 -s 192.168.2.102 -o eth0 -j DROP iptables -I FORWARD 3 -s 192.168.2.103 -o eth0 -j DROP iptables -I FORWARD 4 -s...

sorry if I answer only now. Calisro I tried to do as you told me it does not work: -First i have create firewall-start as below: admin@NetworkDrive:/jffs/configs# cat firewall-start iptables -I FORWARD 1 -s 192.168.2.101 -o eth0 -j DROP iptables -I FORWARD 2 -s 192.168.2.102 -o eth0 -j DROP...

Carlos, if you set "on" the parental control, you can't reach camera via VPN but only via LAN.

The 123 port remain open so, right? I would close all port. Other question: as for UDP, should i do the same for TCP?

Thx Calisro. My cameras was setup with static IP. I have disabled UPNP both in camera setting and in router. I would like to block ALL camera outbound traffic on WAN but i wish i could reach the camera on VPN. I though that this could be done with firewall - Packet Filter, but does not work

Hi jtl, I am in your same situation! I also used Network Service Filter, but i set ">1" value, in both source and destination field to close all ports. Unfortunately, it dont work because apparently the camera can reach the web. The only solution now it's blocking internet access to camera, in...