Recent content by AndreyPopov

RT-N10U on 134.249.188.205 work now on this firmware :) P.S. found in backups and compiled :)

find how switch Huawei from 12d1:1c0b to 12d1:1c05 by usb_modeswitch usb_modeswitch -c 12d1:1c0b where 12d1:1c0b contain: ######################################################## # Huawei E173s DefaultVendor= 0x12d1 DefaultProduct= 0x1c0b TargetVendor= 0x12d1 TargetProduct= 0x1c05...

I'm in a shock!!! my Huawei E173s some times after power off or reconnect show in lsusb 12d1:1c0b than SD card automount, but modem not recognized :( sometimes 12d1:1c05 than modem recognized, but SD card not automount any way. what and where change 12d1:1c0b to 12d1:1c05 !?!?!?!

add to services-start hotplug2 echo -e "p\nq" | fdisk /dev/sda now automount always after reboot

hotplug2 not help even become poor after hotplug2 disappear CD-ROM emulation was sg0 (CD-ROM) and sg1 (SD Card) - become sg0 (SD Card) and now after reboot /dev/sda1 always present. but not automount even after fdisk /dev/sda :(

any idea what to do for automount SD card?

same problem Huawei E173 internal CD-ROM emulation internal SD card reader SD card ext3 formatted after start router define sg0 and sg1 devices and sda but not automount when try in telnet fdisk /dev/sda and quit then /dev/sda1 automounted but after reboot again not automount :(

ftp://cs-volia.asuscomm.com/pub/ASUS/ASUSWRT_MODDED/ ftp://93.76.48.36/pub/ASUS/ASUSWRT_MODDED/ ftp://cs-kyivstar.asuscomm.com/pub/ASUS/ASUSWRT_MODDED/ ftp://134.249.188.205/pub/ASUS/ASUSWRT_MODDED/ new links

I have RT-N12B1. it's must be same as RT-N12C1 but C1 is black. others users report RT-N12D1 and RT-N12_VP work. no any ideas why your RT-N12C1 not start.

rt-n56u and rt-n65u and rt-n14u supported by custom Padavan frimware

test and say what's wrong.

I plan to release. but now some problems with health, time and some others

some versions supported.

I use Tuxera ntfs drivers. Tuxera promise great performance increase under ntfs-3g and even ext2/3. Merlin also use tuxera drivers in others routers.

RT-N12, RT-N12B1 and RT-N12C1 have hardware switch for Operation mode and that's why page Operation Mode and menu was deleted. I return this page for RT-N12 D1