Recent content by Armand28

Recently updated to the latest Merlin version and I cannot find where to set my re-key interval. Searching help links me to the Network tab, but there is no where to set the WPA key interval there, and it’s not in the wireless or wireless>Professional tab. Anyone know where it went? Have a...

Tried a factory reset and still showed bad PEBs. I am working with support to see what my options are. I turned off Traffic Analyzer stats in the meantime, hopefully the router doesn’t die before my replacement comes.

Does a factory reset reset all of the PEBs? If I backup my settings can I restore them or will that just restore the problem? I guess I don’t know what is backed up. Thanks!

Last night I had TWO of them: Oct 15 22:00:16 kernel: ubi0 error: ubi_io_write: error -5 while writing 2048 bytes to PEB 1622:0, written 0 bytes Oct 15 22:00:16 kernel: CPU: 1 PID: 119 Comm: ubi_bgt0d Tainted: P O 4.19.183 #1 Oct 15 22:00:16 kernel: Hardware name: GTAXE16000_2GB...

I’ve had the router for a year, was going through the logs and found two entries last night where bad PEBs were flagged. I went to console and found there are 37 out of 40 reserved being taken up, meaning I only have 3 reserved PEBs left. Does the system allocate more or am I bricked when I...

OK thanks! I was having the issue in this thread as well, was getting massive upload spikes so this must just be coincidental. Changed my password and the spikes seemed to have stopped, but had one short spike last night when these errors occurred.

I also disabled DDNS and removed “Allow access from WAN” and for some reason my DDNS is still allowing me to access the router management and a port forwarded NVR using my asuscomm DNS…. I removed access and re-flashed the latest firmware, and checked the settings and both show disabled.

I got a similar one: Oct 15 22:00:16 kernel: ubi0 error: ubi_io_write: error -5 while writing 2048 bytes to PEB 1622:0, written 0 bytes Oct 15 22:00:16 kernel: CPU: 1 PID: 119 Comm: ubi_bgt0d Tainted: P O 4.19.183 #1 Oct 15 22:00:16 kernel: Hardware name: GTAXE16000_2GB (DT)...

LOL oops, meant 1Gbps, will correct

Just found another thread that thinks they have it solved: https://www.snbforums.com/threads/rt-ax88u-maxing-out-a-core-and-regularly-showing-60-mb-s-upload.92141/

I changed password, turned off SSH, rolled back and then rolled forward to latest Merlin firmware. Should I turn off DDNS? Is that any part of this equation or can I leave it on? Thanks!

I;m having the same issue. AXE16000, Merlin firmware, AT&T fiber, seeing 40MB/s spikes killing my network.

AXE16000 running Merlin firmware, AT&T fiber internet connection. The system status page reports HUGE (40MB/S!!! On a 1Gbit connection!) upload spikes, and all 4 cpu cores spike and my connection to the internet drops. I have a HomeAssistant monitor that pings google every 60 seconds and it...

How did you get your backhaul to use 5ghz? Mine used 2.4ghz and I couldn’t find any way to change it. 2.4ghz backhaul did me no good, plus my 11000 kept losing connection but it may be the same issue I listed in the post above (I need to disable 160mhz). Anyway congrats on getting it working!

OK here is what I learned about my AXE16000 and Ax11000…. The reason the 11000 doesn’t automatically reconnect to my 16000 when it reboots is because when the 16000 reboots it stops broadcasting my 5G1 band which I use as the link, if I hard reboot it, it will do it But not when it soft...