Recent content by BSOD2600

  1. B

    High CPU only when no WAN connection

    No one has any ideas?
  2. B

    High CPU only when no WAN connection

    RT-AC87U 384.13_2 Diversion 4.1.8 amtm 3.0 Been having this problem for several merlin and diversion versions, so don't think its specifically related to their latest releases. Basically, when the cable modem (WAN) looses connection, the 2 CPUs on the router are pegged at 100%. This...
  3. B

    Logging maxes out CPU under heavy network load

    RT-AC87U 384.9 Recently I enabled the firewall log (allow/deny), along with dnsmasq ( log-queries=extra ), which are all being sent externally via syslog. Also have Diversion + pixelserv-tls enabled. Only during peak internet usage (aka bittorrent on a workstation) does the CPU go to 100%...
  4. B

    Diversion not starting after reboot

    Correct. So those of us who have custom settings on nearly every page, what is the efficient way of saving and restoring those? Taking screenshots and manually setting them is super inconvenient. My static DHCP table has at least 30 entries alone. I'm more inclined to waste an hour with a...
  5. B

    Diversion not starting after reboot

    USB drive I dont think is corrupt.. at least the built in disk checking tool doesnt state there are any errors. No amtm. Swap file is installed on USB. No other customization. Yes, let entware and pixelserv be installed. Came from 384.7_2 to 384.9. hmm, full factory rest I had to do before...
  6. B

    Diversion not starting after reboot

    RT-AC87U on 384.9. Diversion 4.0.7 I've got weekly reboots of the router enabled. Ever since updating to 384.9, Diversion+pixelserv will not start up after the reboot. If I ssh to the router, launch diversion, and then enable it, it works just fine for another week. already tried a force...
  7. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    24 hours uptime and no repeating errors...yet. 634 nobody 33968 S pixelserv-tls 192.168.1.11 786 nobody 60804 S dnsmasq --log-async
  8. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    Thanks all for the suggestions. Had a few hour power outage tonight so everything has been sufficiently reset :) A 256MB swap has been created. logging still disabled. we'll see if this fixes the recent issue. if/when this error occurs again, what are the correct command(s) so help properly...
  9. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    Made it about 11 hours from the reboot until the error started to be logged again. ASUSWRT-Merlin RT-AC87U 384.7-2 Sun Oct 21 17:18:24 UTC 2018 [email protected]:/tmp/home/root# ps w PID USER VSZ STAT COMMAND 1 admin 5328 S /sbin/preinit 2 admin 0 SW [kthreadd]...
  10. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    When in doubt, reboot... did that few minutes ago. Will see if this error continues. [email protected]:/tmp/home/root# ps w PID USER VSZ STAT COMMAND 1 admin 5328 S /sbin/preinit 2 admin 0 SW [kthreadd] 3 admin 0 SW [ksoftirqd/0] 4 admin 0...
  11. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    Because I'm cheap and was trying to get by with an old usb drive ;) Since disabling logging, the usb drive hanst filled up... but the dnsmasq.leases: No space left on device error continues. Hmmm. Maybe something new with 384.7_2 ? [email protected]:/tmp/home/root# df -h Filesystem...
  12. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    Odd, the Diversion requirements ( https://diversion.ch/diversion/requirements.html ) states min of 500MB. It shouldn't be that hard to tweak the log size / roll over count for dnsmasq, right? Not that familiar with Linux to know where to look and change the setting...
  13. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    A 512MB flash drive is plugged into the router. Pretty sure I said no to swap due to the storage constraints. Due to physical space constraints, the USB 2 drive is plugged into the rear of the router.
  14. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    How would I check the swap setting? USB is connected to the port in the rear (next to the enet ports).
  15. B

    [Diversion] failed to write /var/lib/misc/dnsmasq.leases: No space left on device

    Woke up to find no LAN devices could access the Internet. Eventually figured out the router wasn't handing out DHCP any longer. Found the following in the router logs Oct 30 06:42:12 dnsmasq[24902]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s) Oct 30...
Top