Menu
What's new
By:
Filters Better Search

Recent content by camilaacolide

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. C

    Help: NAT Loopback is working only half the time.

    DNSFilter is disabled. Later I'll remove the dnsmasq config and try the nslookup commands on my computer. But the fact that it also happens "half the time" on my iPhone makes me think this might not be the problem. It's weird.
  2. C

    Help: NAT Loopback is working only half the time.

    Well, right now I have created a dnsmasq.conf.add file mapping the domain name to the internal IP, and it fixed the problem (effectively working around the NAT loopback). But it was definitely not necessary before. Where can I check my DNS settings for misconfigurations?
  3. C

    Help: NAT Loopback is working only half the time.

    Hello, I have a RT-86U with version 384.17 which has been working perfectly since forever. I run a Raspberry Pi in my LAN with Nextcloud, and I could access it from anywhere using my DDNS (inside and outside the LAN). But last week, I had to reinstall it from scratch due to a corrupted SDCard...
  4. C

    What's the best "standing" asus router that merlin supports?

    Thanks Merlin! =)
  5. C

    What's the best "standing" asus router that merlin supports?

    I had an RT-AC68U, which died and was upgraded to an RT-AC86U. Now I'm thinking about upgrading again. Which is the best "standing" asus router with merlin support on the market today? Would it be the RT-AX86U? Thanks!
  6. C

    Need help choosing next ASUS-Merlin router.

    For the last 5 years I've been using my faithful 68U with the latest merlin firmware. But today, I suffered a power loss in my neighboorhood, and my router got the dreaded static USB 2.0 light and nothing else. It doesn't boot, doesn't reset, doesn't nothing... =( ... seems like it's busted...
  7. C

    Bug in 384.9: Samba Share concurrent connections.

    I have two RT-AC68U routers with Merlin. Setting this value to "10" in my router with firmware 378.56_2 works fine. Setting this value to "10" in my router with firmware 384.9 doesn't work, as described above. If ASUS limits it to one character in new firmware versions, I'd suggest just...
  8. C

    Bug in 384.9: Samba Share concurrent connections.

    Exactly this. When you enter "10" and hit Apply, it displays the "Applying Settings" page, but there is no Percentage Progress and the entered value is not applied... if you enter any other value from 1-9 and hit Apply, the Percentage Progress displays fine (20%... 40%... 60%...) and the value...
  9. C

    Bug in 384.9: Samba Share concurrent connections.

    I can only allow up to 9 concurrent connections in Samba Share. If I try to set it to 10 in the web UI (the maximum allowed), it doesn't work.
  10. C

    Is it possible? (WAN Printer Bonjour)

    Here is my network configuration in the company I work for: Me (192.168.90.X) -- (lan)RT-68U(wan) -- Printer (192.168.0.X) -- (lan)ROUTER(wan) -- INTERNET We have a private network (192.168.90.X) that uses the building shared network (192.168.0.X) that finally has access to the internet. And...
  11. C

    [Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

    Yes, I've read! It's exactly the phrase "This older code base has a history of being very stable" that made me flash it! I started having some instability problems with 378.56_2, so I flashed the latest 374.43 beta. But later I traced the problems to my ISP's ADSL router, and now they're fixed...
  12. C

    [Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

    Flashed it here too and everything is smooth! Quick question: Before flashing this version I was using 378.56_2. Both versions are working very well for me. Is there any advantage of using this version besides controlling the wireless power? I have an AC68U. Thanks!
  13. C

    378.55 Firmware periodically waking up network attached printer

    Only found this thread today. I have an HP M252DW and this happens to me with 376.47 when it's connected via Ethernet, but not when it's connected via Wi-Fi. This has always bothered me! I'll try to install 376.49 or 378.54 and see if it stops. Thanks.
  14. C

    Just got an AC68U. Which merlin build to use?

    Thanks Merlin! So carov2007, I guess that changing the country code in the CFE doesn't allow me to adjust the antenna power above 80mW in the web interface. Maybe it makes it possible to adjust the antenna power using some script, but I haven't looked into that. Edit: By the way Merlin, which...
  15. C

    Just got an AC68U. Which merlin build to use?

    Hmmm... Going into Advanced Settings > Wireless > Professional, I now see that the very last configuration is called TX Power Adjustment, with a slider that goes from 1% to 100%. I didn't catch this before, maybe because the channel configuration is in another place! Searching some posts...
See more
Top