What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by ceromus

  1. C

    Hows failover working with rmerlin? RT-AC68U

    Sorry that was for the peplink router that I decided to go with. I was never able to get the RT-AC68U to switch over reliably.
  2. C

    Placing a 2nd router behind main router to add wifi+openvpn.

    Sorry I wanted the openvpn on the asus just to connect a single device remotely to my network from outside of my network. edit: no didnt repurpose lan port as a wan port
  3. C

    Placing a 2nd router behind main router to add wifi+openvpn.

    I recently purchased a wired only business router that does not have wifi or openvpn. I wanted to add both to the network so I disabled DHCP on the 2nd router and connected an ethernet cable from the main routers lan4 to the second router (an asus rt-n16 currently running tomato). Once I did...
  4. C

    Hows failover working with rmerlin? RT-AC68U

    I tested the peplink balance 20 a little last night. It takes 23-26 seconds to failover which isn't really acceptable. I think thats mostly because it puts the backup connection in a cold standby mode until WAN1 fails unless I keep them both enabled (aka load balancing) which I did not want to...
  5. C

    Hows failover working with rmerlin? RT-AC68U

    50mbps down 5mbps up, the 2nd wan is currently at like 3mbps/1mbps so i was planning to do just failover. I wasn't aware there was reliable WAN aggregation available. I use to do that a long time ago with software but it was kind a pita. I went ahead and ordered a peplink balance 20 but im...
  6. C

    Hows failover working with rmerlin? RT-AC68U

    Do you have any personal experience with any of them? I would be aiming for something under 300 dollars.
  7. C

    Hows failover working with rmerlin? RT-AC68U

    thank you
  8. C

    Hows failover working with rmerlin? RT-AC68U

    I was just about to ship back the RT-AC68U I recently ordered as I found the failover /w watchdog performance to be really bad using official firmware. Is it significantly better with this firmware? Thanks
  9. C

    [Fork] Asuswrt-Merlin on Broadcom MIPS RT-N series

    Sorry what? any = many?
  10. C

    [Fork] Asuswrt-Merlin on Broadcom MIPS RT-N series

    I had recently purchased the RT-AC68U and thought the dual wan failover + watchdog worked like garbage. (using newest official firmware) Would this firmwares dual wan failover /w watchdog work better on my RT-N16?
See more
Back
Top
✖