Recent content by CGFara

OK, I have spent more time than I thought possible on this and have some more results. First, let me respond to the last feedback. When I try to set it to "nvplus" I get an error that "Could not find the masquerade address in DNS. Please check that the value has a DNS entry or enter a...

Both the Gateway and DNS Server 1 are pointing to the LAN side IP address of the WRT610N. DNS Server 2 and 3 are pointing to the DNS servers provided by my WAN side DHCP. Done. The name is Netgear_NAS, which is unique on my network. Both were/are disabled. The share has nothing checked...

So I was able to setup the FileZilla FTP Server on one of my machines and successfully read/write from a client PC on a different network. On the FileZilla FTP server I changed the following from the default to try and mimic my understanding of the ReadyNAS: 1) Changed the Passive Mode to a...

I will try to set up one of my computers as an FTP Server later tonight and see how that works. No, I do not have Jumbo Frames setup (the WRT610N does not support it). Currently the MTU in the ReadyNAS is 1492 and the MTU on the WRT610N is 1492. I have adjusted the ReadyNAS to 1500 (which...

Thanks for the quick response. I didn't think of trying that. So I swapped the IP addressed between the DNS-323 and the ReadyNAS and rebooted both machines. I left the port forwarding in the Linksys the same as it was for the DNS-323 (only Port 21 forwarded). It didn't seem to have any...

I am having some issues getting FTP working on my new ReadyNAS NV+ (RAIDiator 4.1.6) and was hoping you guys could help point me in the best direction for troubleshooting. I have spent a couple of solid days troubleshooting and I have already opened up a case with Netgear, but I was hoping one...