What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by cpu

  1. cpu

    Which Router to upgrade to from RT-AC66U

    Before I got my ac3200 I lived in a 2 story with basement, with the AC-68 in the basement. I couldn't do much of anything from the second story until I put a router(AP) on the 1st story.
  2. cpu

    Which Router to upgrade to from RT-AC66U

    Currently I have the 2.4ghz turned off on the rt-ac3200 and both 5ghz radios setup with smart connect, although this didn't seem to change anything there as everything seems to pick 5g-2 on channel 161. The rt-ac68 is setup to handle all 2.4ghz and acts as a backup on 5ghz if I need it. All of...
  3. cpu

    Which Router to upgrade to from RT-AC66U

    How many floors ? I have two floors in about 3000 sq feet and I found that having a single router wouldn't hack it. I ended up with a RT-AC3200 as the gateway on the lower level and a RT-AC68 on the upper level and I get pretty good coverage. I've played with a RT-AC66 I have as well and found...
  4. cpu

    Change in UI Failure with Merlin 378.56

    Problem back after admin@RT-AC3200-36A0:/tmp/home/root# uptime 09:05:25 up 7 days, 15:46, load average: 0.00, 0.01, 0.04 Not absolutely sure I have the right version as this was marked as a beta as I grabbed it on the 2nd RT-AC3200_378.56_2.trx but the Httpd appears to be stuck again after over...
  5. cpu

    Asuswrt-Merlin 378.56_2 is now available

    My Rt-AC3200 has now been up for almost 6 days with 378.56_2 Thanks. Average time before this was 3.5 days. But when I when to look at the Traffic Analyzer everything works except the 5Ghz tab which reports Zero. That's interesting since I am currently copying 500 gigabytes over a 5ghz...
  6. cpu

    Change in UI Failure with Merlin 378.56

    Thanks for the information, can't wait.
  7. cpu

    Change in UI Failure with Merlin 378.56

    After installing 378.56 on my RT-AC3200 I noticed after 3 days 12.5 hours that I could no longer login to it via HTTP. No problems getting into it via SSH and it appeared to be routing traffic with no problems. Is there some way to restart httpd ? Of course rebooting it resolved the issue. I...
  8. cpu

    Need some help turning on debug output on hanging AC3200

    Update: I rebooted the my RT-AC3200 with the latest ASUS firmware 3.0.0.4.378.4980 on March 17th and until last night when we took a lighting hit that shutdown m y network all appeared to work fine, but it wasn't. Since I moved my dhcp server to a Linux box the 3200 has been mostly just an...
  9. cpu

    Need some help turning on debug output on hanging AC3200

    I was running Merlin when it failed, the AC3200 never had any older Merlin versions for me to try. I put Merlin on it the moment I got it. I have updated it to the latest Asus firmware and will see if that fails, but one version back seems to work fine. I didn't see anyone else reporting this...
  10. cpu

    Need some help turning on debug output on hanging AC3200

    I called Asus support last week and backed out to 3.0.0.4.378_4145-gfde59d3 last Friday morning. The unit has now been up for 7 days and 9 hours with no problems. Not sure where to go from here, but first time the unit has stayed up more then about 3.5 days.
  11. cpu

    RT-AC68U repeater bridge??

    Try Googling 'magicjack firewall ports' it appears you need to open up some UDP ports to get it to work.
  12. cpu

    RT-AC68U repeater bridge??

    I did it with a AC66 as an AP and a AC68 in repeater mode and it worked, about 8-10 months ago, but I had a Samsung TV at the end trying to watch Amazon Prime and I could not keep a connect up on it so I gave up and ran a long wire to a switch. The TV had Wifi but it would drop Amazon Prime...
  13. cpu

    Need some help turning on debug output on hanging AC3200

    Been fighting with this since I upgraded my AC68U to 378_50. Thought the problem might be the AC68U so I replaced it with a AC3200 just to have the same issue. The AC3200 is brand new and it's first version was 378_52_0 and it's on 378_52_2 now.And yes, I did a factory reset on both boxes I have...
  14. cpu

    Noticed this feature when creating a double class C network

    I just got a RT-AC3200 so I thought I would increase my address space and created a double class C network internally at 172.16.2.0/255.255.254.0 Setup the DHCP and everything else and it all works and looks great except for one thing. When pull up the network map I only see the clients in...
See more
Back
Top
✖