Recent content by CrashXRu

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.
  1. C

    how to add such a static route in the web interface ?!

    you did not understand, I need to add a route using the web interface how to do it in the SSH know BUT Linux has such options ip-up-script / tmp / ppp / vpnc-ip-up ip-down-script / tmp / ppp / vpnc-ip-down ip-pre-up-script / tmp / ppp / vpnc-ip-pre-up auth-fail-script / tmp / ppp /...
  2. C

    how to add such a static route in the web interface ?!

    how to add such a static route in the web interface route -n add -net 192.168.99.0 netmask 255.255.255.0 ppp5 you need to see the network for nat when connected via pptp vpn it is inconvenient to execute this command every time I connect to vpn
  3. C

    how to install firmware via ssh ?

    tnx hnd-write GT-AC2900_3.0.0.4_386_42494-g7142c8d_cferom_ubi.w
  4. C

    how to install firmware via ssh ?

    There is a need to install the firmware via the router's cx console how to do it? I know that you can unpack the firmware using binwalk I checked the sections and realized that the unpacked parts do not correspond to one of the sections ? For older routers
  5. C

    Need HW config RT-AX3000, RT-AX58, RT-AX82, TUF-AX3000

    of course i understand that that's why I'm asking for data not on all models you can enable this option, but I have already managed to determine where exactly you can RT-AX3000 can be turned on, but with some restrictions (the same as in TUF) all these models have one module and one wiring...
  6. C

    Need HW config RT-AX3000, RT-AX58, RT-AX82, TUF-AX3000

    I need help I want to find an opportunity to turn on mimo 4x4 there are already successful attempts to enable mimo 4x4 for ax58/ax3000 but for now this is a temporary solution different equipment is produced for different countries, so I want to collect all the model options so far collected...
  7. C

    Running Merlin on RT-AX82U

    there are already successful attempts to enable mimo 4x4 for ax58/ax3000 but for now this is a temporary solution different equipment is produced for different countries, so I want to collect all the model options so far collected European models, several Chinese
  8. C

    Running Merlin on RT-AX82U

    Are there any owners RT-AX3000 RT-AX58 RT-AX82 need help https://www.snbforums.com/threads/need-hw-config-rt-ax3000-rt-ax58-rt-ax82-tuf-ax3000.69771/
  9. C

    Need HW config RT-AX3000, RT-AX58, RT-AX82, TUF-AX3000

    I turn on the closing option, the power is adjusted to the requirements of my country I got 160MHz and VPN FUSION on my AC86
  10. C

    Need HW config RT-AX3000, RT-AX58, RT-AX82, TUF-AX3000

    Hello to whom it is not difficult you can execute several commands in SSH nvram show | grep -E 'boardflags|HwBom|HwId|HwVer|bl_version|model|odmpid' | sort nvram show | grep -E 'territory_code|ccode|regrev|regulation|wl[0-9]_country|wl[0-9]_reg_mode' | sort you need this to analyze the model...
  11. C

    Running Merlin on RT-AX82U

    RT-AX82 - Based on AX58_iPA platform RT-AX58 - Based on AX58_iPA platform TUF-AX3000 - Based on AX58_ePA platform
  12. C

    ASUS RT-AC3100 dump and edit CFE

    you need to replace or reball the wifi chip it is possible to decipher the CFU, but this will not solve your problem
  13. C

    ASUS RT-AC86U 3.0.0.4.384_81918-gc0daad1

    Available for manual updates from a web router or can be downloaded separately from the link there is no information on the site yet https://dlcdnets.asus.com/pub/ASUS/wireless/RT-AC86U/FW_RT_AC86U_300438481918.zip
Top