Menu
What's new
By:
Filters Better Search

Recent content by D34DC3N73R

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D34DC3N73R

    Preferred "NAT Loopback" method?

    My WAN IP is the same as it has been for quite a while. I use a custom DDNS with Cloudflare and a script that updates the WAN IP on router boot. All domains/subdomains resolve fine out of network. I did some application and docker image updates on the server last night but it was running fine...
  2. D34DC3N73R

    Preferred "NAT Loopback" method?

    I have an RT-AC88U running asus merlin 386.3_2. For the longest time, NAT loopback seemed to be working just fine for me, but it stopped working for me today. I know the setting was removed from the firewall section in 2018, and I've tried to read any other threads in regards to NAT loopback...
  3. D34DC3N73R

    Asus RT-AX88U WAN to LAN Speed problem

    I was having a similar issue on my RT-AC88U that took me a while to fix. Check Tools > Network > HW Acceleration and see what's enabled. CTF is cut through forwarding, FA is flow acceleration. If both are enabled it should say "Enabled (CTF + FA)". When I was having the issue, only CTF was...
  4. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    No need as it's working now near the advertised speed. I did just build an office computer for my girlfriend and the day I got a 20' cat6 cable is the same day I figured out the hardware acceleration settings.
  5. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    So, I finally got this running at high speeds. After multiple resets with no resolution, I noticed cpu0 would spike up to 100% when downloading even at 200 mbps. Checked out top and had a high sirq on cpu0 when downloading as well. CTF was reported as enabled, but it didn't seem like it was...
  6. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    I think I'm putting too much faith in the speedtest. I'm getting over 500 with usenet on the server, even though I'm topping out around 350 with the speedtest. I'm building a home office computer now, so I'll have a windows box I can test with soon. I'll update within the week with results.
  7. D34DC3N73R

    Additional Device Icons

  8. D34DC3N73R

    Additional Device Icons

    Here are some I just made.
  9. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    It's the ugreen adapter which seems to have the AX88179 chipset. Reading other reviews seems to indicate it'll top out around 550. I find it suspicious that it's getting the same speed (350) as my server. I'll test it out connected directly to the modem, as well as connecting the shield directly...
  10. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    It was a usb3 adapter and a usb3 port. If what I've read is correct, the capable throughput should be around 5gbps. So I shouldn't have an issue reaching gigabit speeds with that setup. Test was done using a cat5e cable. To clarify, usb3 throughput should be around 5gbps. It's still a gb...
  11. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    Right, I get that. My thought was it'd be nice to still get near gigabit speed, while a local file transfer is occuring. I did reset the router after upgrading to the beta and still had the same issue. The only settings changed were the bonding setting, and a port forward.
  12. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    I don't have a laptop with an Ethernet port, but using a usb3 Ethernet adapter, I get 350 down. I'll be able to test direct from the modem shortly.
  13. D34DC3N73R

    Slow LAN speed bonded 802.3ad

    I recently upgraded my internet to gigabit through spectrum (940/40) and noticed I'm not getting good speeds when running speedtest-cli on my home server. My router is the RT-AC88u running Merlin 384.11_beta1 with Bonding/ Link aggregation enabled. I'm using a Rosewill RNG-407-Dualv2 NIC with...
  14. D34DC3N73R

    [Release] Asuswrt-Merlin 384.7 is now available

    I'm using the AC88U and have held off on the update after seeing the ddns bits in the changelog. I currently use cloudflare and my script is fairly close to the example with the exception of getting my wan ip with IP="$(nvram get wan0_ipaddr)" Will that continue to work or will I have to adapt...
  15. D34DC3N73R

    Get rid of the certificate error when using https access and DDNS?

    My setup is pretty different (LetsEncrypt set up on a home server as opposed to a router), but I disable http/s WAN access use ssh+tunnel to access the interface remotely.
See more
Top