• SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by DANIEL LOWE

  1. D

    RT-AC68U no lan or wan connection, will not boot pass CFE

    if i could get the firmware update, than i could use it as an extender with asus mesh. but with out knowing that voltages are needed where, its hard to find the defective regulator.
  2. D

    RT-AC68U no lan or wan connection, will not boot pass CFE

    our does someone have the schematic for RT-AC68 router? i could at least trace the voltage to the chips and see if one of the regulators is dead.
  3. D

    RT-AC68U no lan or wan connection, will not boot pass CFE

    ya, that was what i was afraid of. so i`m guessing there is no way to get a firmware loaded from the serial port?
  4. D

    RT-AC68U no lan or wan connection, will not boot pass CFE

    yes it shows an ip address of 192.168.1.1 mask 255.255.255.0. Set the workstations to 192.168.1.2 no luck. have tried nvram erase, many times. No luck. also have verified that the power light is blinking and the serial ports shows force recovery and the TFTP message: Reading :: TFTP Server...
  5. D

    RT-AC68U no lan or wan connection, will not boot pass CFE

    so i brought a second hand RT-AC68 router that was stated to have problems with the lan ports. After getting the router, i reset to defaults the router on the DD-wrt page. After which it stopped booting correctly. so i writed up the router to Serial and was able to see that is "Null Rescue...
Back
Top