What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by davewolfs

  1. D

    MoCA 2.0 Actiontech ECB6000

    Has anyone used firmware ecb_flashimage_2_11_1_50_6200_727 ?
  2. D

    ECB6200 Upload Speed

    For all the trouble, why not just drop cat6a?
  3. D

    Speed Ports have Negotiated At - Full/Half Duplex

    How can I view what speed my ports have negotiated at and also see if they are half or full duplex. I am using Merlin's firmware on an RT-N66. Thanks!
  4. D

    ECB6200 Upload Speed

    Has anyone tested for full duplex? Without a doubt, these adapters do not appear to operate at full duplex.
  5. D

    MoCA 2.0 Actiontech ECB6000

    Folks, If anyone is having transfer issues with a nas style system using either NFS or CIFS share I suggest you set your tcp send/receive window sizes to 1 megabyte. I've been able to get really good transfer rates in doing so. Around 110mb/sec. Previously I was capped at 35mb/sec for my...
  6. D

    ECB6200 Upload Speed

    Issue was resolved by adjusting the default send/receive tcp window size. https://docs.oracle.com/cd/E36784_01/html/E37476/gnkor.html On OmniOS I was able to run: ipadm set-prop -p recv_buf=1048576 tcp ipadm set-prop -p send_buf=1048576 tcp ipadm set-prop -p max_buf=2097152 tcp svcadm restart...
  7. D

    ECB6200 Upload Speed

    Copying a 2GB file and looking at the transfer rate in Windows. Just a very simple method.
  8. D

    ECB6200 Upload Speed

    What do you mean by limiting power in?
  9. D

    ECB6200 Upload Speed

    Hoping someone can provide some input on this. Download Speed across Lan is good 100mb/sec. Upload speed seems to be hard capped at 35mb/sec. I have tested my adapters connected directly and also across many rooms. The speed always remains the same. If I use a direct ethernet connection...
  10. D

    Actiontec MoCA 2.0 ECB6000 Encryption

    I really don't see the point in the encryption. You can easily put the filter at the point of entry.
  11. D

    Reload hosts.add without reboot

    Hi is it possible to reload my hosts.add entries without rebooting the entire router i.e. stop/start a service? Thanks!
  12. D

    Unable to connect above 100 full duplex on Gigabit Card

    I've fixed the issue. Turns out that having IPMI turned on the failover port instead of the dedicated port was causing Lan 1 to drop to 100 mode. I've changed this and am now connecting at 1000.
  13. D

    Unable to connect above 100 full duplex on Gigabit Card

    Well the issue is with a motherboard that has gigabit ports that I am connecting directly to the router. What type of details do you want exactly?
  14. D

    Unable to connect above 100 full duplex on Gigabit Card

    Hey folks, I have an issue where I am connecting a Gigabit card to a local port and the link state is set to 100 Full Duplex. What steps can I take to troubleshoot this. This is a gigabit card so shouldn't it default to 1000 Full Duplex? Appreciate any help.
  15. D

    Tracking Bandwidth Usage Per Device in Real Time

    Asus RT-N66 using Merlin firmware
See more
Back
Top
✖