Recent content by Dr.Cheeks

This topic explains the issue (assuming this is what also affects you) https://www.snbforums.com/threads/be-98-pro-3006-102-5-upgrade-lan-port-issue.95528/post-968450

(Now I can switch to Merlin again, I assume the issue is the same there... and that it doesn't show if there's no Guest Network with 'isolation'...)

I reset the RT-BE92U (on Asus 3.0.0.6.102_38962) to factory defaults. That seemed to resolve the issue. LAN ports could now talk to each other and the rest of the local LAN HOWEVER, as soon as I enabled the (WiFi) Guest Network (with 'isolation') the issue returned: LAN ports could no longer...

Done. I'll report back here if anything comes of it.

Note on the first "LAN ports not communicating to local LAN" issue: I now also have it after upgrading to an official ASUS firmware... I originally got it after upgrading my RT-BE92U from ASUS 3.0.0.6.102_37563 to MERLIN 3006_102.5_0 Going back to ASUS 3.0.0.6.102_37563 resolved it. Yesterday...

About this issue... "LAN ports can connect to the Internet, but not to other devices on the local LAN" I now also have it after upgrading to an official ASUS firmware... I originally got it after upgrading ASUS 3.0.0.6.102_37563 to MERLIN 3006_102.5_0 Going back to ASUS 3.0.0.6.102_37563...

Hmm, interesting. Thanks for the response! (I want my Guest Network to apply AP Isolation, so I'll stay on my reverted 3006.102.4 until a future firmware release doesn't force this 'isolation' onto the LAN ports.)

Could be this same issue I mention in this post: https://www.snbforums.com/threads/asuswrt-merlin-3006-102-5-is-now-available.95358/post-965768 (And the post I'm referring here...) What router model do you have?

Ahh, so because my Main Network already has assigned the 2.4, 5 and 6 Ghz bands, there can be no other Main Network. Or in other works: suppose I want a '2.4 Ghz only' Main Network, then I have to remove the 2.4 band from the 'primary' Main Network. Right? In my setup I wanted the 'primary'...

I have a RT-BE92U and see the same behavior: you cannot add 'another' Main Network, pressing the button leads to "Your rules have reached the maximum". This occurs both in the most recent Asus and Merlin firmwares (I did not check further). It seems to me to be 'intended', but also 'bad UI'...

Want to confirm the same issue: Upgrade my RT-BE92U from Asus 3.0.0.6.102_37563 to Merlin 3006_102.5_0 and devices connected to the RT-BE92U by Ethernet cable are 'cut off' from the local network. They can still access the Internet, but they can no longer reach other devices on the local...