• SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by eagctx

  1. E

    DNS only working via DHCP

    I'm going to pin this on the RT-BE92U. I returned it because of this and many other issues.
  2. E

    RT-BE92U rebooting

    I did return it. Too much of a hassle dealing with it.
  3. E

    RT-BE92U rebooting

    was the only LED on. Couldn't ping it. Had to Power it off to get back to it. After that it ran twice more for less than 5 minutes each time before rebooting. I've disabled both the 5 and 6 Ghz radios. I did this last week when I received it and it was rebooting. At this point I believe it...
  4. E

    RT-BE92U rebooting

    It MAY be the 6Ghz radio. As I wrote in my last post, I re-enabled the 6Ghz radio and added it to my Network. It ran for 17 minutes more, and rebooted. I was out for a while and got back and the router was non-functional. Power light
  5. E

    RT-BE92U rebooting

    Update: Got up this morning and tried several things. 1. Manually, meaning from the downloaded file, upgraded/re-flashed the firmware. Immediately after that I did a factory reset from the WebUI. This didn't change anything and rebooting continued. 2. Did a factory reset using the reset...
  6. E

    DNS only working via DHCP

    Yeah, I double checked that so I wasn't making a rookie mistake. I need to circle back on this at some point. Right now there are bigger issues with this router rebooting every 30 min.
  7. E

    RT-BE92U rebooting

    And, to be clear, I was using it as a switch, but not anymore.
  8. E

    RT-BE92U rebooting

    Yes, essentially you're correct. It has an IP on my LAN and is simply supplying WiFi in my house. I have the Ethernet cabled plugged into LAN port 1 on the BE92U; nothing is plugged into the WAN port.
  9. E

    RT-BE92U rebooting

    I see some other threads on the BE92U rebooting. But I think the situation I'm in is different. I have it configure in AP Mode, so not as a router. It's on my local LAN and sits behind a hardware firewall. I had four(4) cables plugged into the LAN ports, the feed to a large switch with Internet...
  10. E

    DNS only working via DHCP

    I have a new RT-BE92U. I'm basically replacing a RT-AX86U and moving that to an IoT only subnet. NB. These are both in AP mode. They are not "routers". Anyway, ran into an issue with DNS. Trying to setup the 92U the same as the 86U, manually setting the LAN IP address, and DNS works fine and...
  11. E

    Release RT-BE92U Firmware Firmware version 3.0.0.6_102_37523-g25e34fa_1096-gff526 03/27/2025

    I'm the the USA. It's not working for me so while it may be geographic, the US isn't exempt.
  12. E

    Release RT-BE92U Firmware Firmware version 3.0.0.6_102_37523-g25e34fa_1096-gff526 03/27/2025

    The Asus Global site still shows it. But still corrupted. https://www.asus.com/networking-iot-servers/wifi-7/all-series/asus-rt-be92u/helpdesk_bios?model2Name=ASUS-RT-BE92U
  13. E

    Release RT-BE92U Firmware Firmware version 3.0.0.6_102_37523-g25e34fa_1096-gff526 03/27/2025

    Very strange. I just power cycled the route, which btw I just received yesterday. Still no joy. This is what I get: I'd like to install this because this thing was extremely unstable when I was working with it yesterday. I'm only using it in AP mode and with the 5 & 6 bands enable in WiFi...
  14. E

    Release RT-BE92U Firmware Firmware version 3.0.0.6_102_37523-g25e34fa_1096-gff526 03/27/2025

    I will try power cycling. Still wonder about the posted zip file though.
  15. E

    Release RT-BE92U Firmware Firmware version 3.0.0.6_102_37523-g25e34fa_1096-gff526 03/27/2025

    I see the link. However, my router checking from the app says the firmware is up to date. If I download the zip file, it's broken/corrupt. Not sure how you got this to work.
Back
Top