Recent content by Enrico85

I see the all the top Asus router mount a Broadcom chipset. Is the problem present on all models? thanks

thanks! the speed over WG vpn is about 500 mbit/s. the exact value of the broadcom limit do you think it will improve with future updates? Iperf result: VPN OpenVpn [Router server - Router client] (Site to site) [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 188 MBytes 158 Mbits/sec...

yes I'm ready. what should I do? thanks

without the local ip (see attachment) same upload problem I removed the rule with the command: echo "del 192.168.2.0/24" >> /proc/blog/skip_wireguard_network

Yes it works. Thanks You can see the results in the last attachment I put this rule (see attachment) So the cap that you said before about 500 Mbit/s can be related to my VPN speed? (same value about 500 Mbit/s) Is the Broadcom chipset the problem? I'll test this change in the next days Thanks

TOP but after restarting WG the issue come back

cat /proc/blog/skip_wireguard_network 192.168.2.0/24

yes the NAT is off, see attachment. the upload speed is the same of the vpn tunnel speed, so it's a very strange effect

my config is: GT-AX6000 as Router WireGuard with local ip 192.168.0.1 GT-AX6000 as Client WireGuard with local ip 192.168.2.1 all the clients behind the 192.168.0.1 came out to the web with the correct gateway public ip address X.X.41.131 all the clients behind the 192.168.2.1 came out to the...

I understand the performance issue, but the routing should work fine. with openvpn I didn't have this problem

thanks for the answers. I have another question about the upload speed this is my config: the router as server and the router as client WireGuard. All the clients behind the client router go out with the asus router client ip (in this case X.X.27.120) so the routing seems good but the upload...

Hi guys, I have a very similar config with 2 router GT-AX6000 I got this bandwidth values using iperf: VPN OpenVpn [Router server - Router client] (Site to site) [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 188 MBytes 158 Mbits/sec sender [ 4] 0.00-10.00 sec 187 MBytes 157 Mbits/sec...

the problem is this: thanks

I already use this settings

Hi all, I have 2 routers RT-AC86U connected to each other with a vpn site to site using openVpn (both router have server and client feature enabled) this configuration has been working for several years, but with the firmware higher than the version 386.7_2 cpu usage grows up to 70% (100% of a...