What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by EU1

  1. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    It is OK. You would set any value, it seems that this setting doesn't work at all.
  2. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    Just tried to reboot the router after changing TX power several times. Nothing changed :(.
  3. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    AC-7260 minicard is out of stock in Ukrainian stores, so I've bought desktop AC-7160 kit for $55 (which contains AC-7260 minicard, PCI-E to PCI-E minicard adapter, and dual band antennas assembly). I've compared kit antenna with my laptop built-in antennas and found that RSSI is almost the...
  4. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    RMerlin, thanks for useful information. Do you know whether it is possible to get WI-FI radio stats (especially router side RSSI and TX power) through SSH? Interesting... Do you use RT-AC56U? In my setup RRSSI is the same with 20 mW and 100 mW (while 5x difference in TX power should give us...
  5. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    It would be a maximum, but 1 mW vs. two concrete walls (each wall is about 20 cm width) sounds like a fantastic... Therefore I believe that the real transmission power is much more than 1 mW. ikoul, on AC56U Tx power is configured in mW, so I expect that the scale is linear. Therefore when I...
  6. E

    Asus RT-AC56U FW 3.0.0.4.374.38_2 - 'TX Power' setting seems to be broken

    The router is RT-AC56U (HW rev. 2.20) with Merlin FW 3.0.0.4.374.38_2. RSSI measured on Intel N2230 card (2.4 GHz) does not depend on TX power at all. I have measured RSSI of about -30dB 3-4 meters away in the same room and about -75...-70dB behind two concrete walls. Measured values with...
See more
Back
Top
✖