Recent content by FauDrei

Had similar problem today with AnyConnect through my AC68U... LAN -> Switch Control -> NAT Acceleration = Disable solved my problem.

A brief update (and reminder for me what to try next time): I have disabled HW acceleration (had CTF+FA enabled) and either this or accompanying reboot solved my problem - after that upgrade to 384.8_2 finished successfully (RT-AC68U).

Thanks for the tip... Tried iExplorer and FireFox (portable) beside Chrome - still the same "Invalid Firmware Upload" message.

Strange... I got this: ...anyone else with this problem?

Thanks. Sorry for asking a known issue. My snbforum searches did not yield anything useful, perhaps because I've used wrong keywords.

My home RT-AC68U (Asuswrt-Merlin 384.7) is configured like this: ip: 192.168.22.2 subnet: 255.255.252.0 DHCP range: 192.168.20.100 - 192.168.20.200 I also have set of static IPs in 192.168.21.10 - 192.168.21.100 range. I have noticed that web UI client list consists just of 192.168.22.x...

I am not using SMB attached disks, but those lines almost doubled wi-fi throughput on my AC68U: echo 524288 > /proc/sys/net/core/rmem_max echo 524288 > /proc/sys/net/core/wmem_max echo 4096 87380 3521536 > /proc/sys/net/ipv4/tcp_rmem echo 4096 65636 3521536 > /proc/sys/net/ipv4/tcp_wmem If I...

Thanks hank81... I was surprised too - my temperature drop expectations were ≈ 5° C for radios and ≈ 5-10° C for CPU. As for positioning the fan - I wanted it near power regulators, but I have been mainly guided by the grill openings on the back of AC68U. Since the results are beyond...

...aw... that's most probably the answer to my question. Thanks.

...small closed storage room... cable modem, router, laptop (acting server), two external USB HDDs, laser printer and UPS... 4x4cm 5V 0,9W fan soldered to USB A plug, powered from AC68U USB 2.0 port and fixed with four small triangles of thick double adhesive tape (blowing in)... radio...