Recent content by gil80

Using Merlin 3004.388.9_2 on my RT-AX88U Under the Network Map, I no longer see the Client Status/AiMesh/Etc. I tried different browsers to no avail. Any ideas if it's a bug in the firmware?

That did the trick. Unfortunately, it's not ideal to provide intranet access, but it's better than the other option you mentioned with adding a 2nd adapter is not something. Thanks.

No, but I changed it to permit all origins and restarted the DNS resolver, but it didn't provide internet access on the 2nd guest network.

That's the output: Bridge table: broute Bridge chain: BROUTING, entries: 11, policy: ACCEPT -p IPv4 -i wl0.2 --ip-dst 192.168.1.1 --ip-proto icmp -j ACCEPT , pcnt = 0 -- bcnt = 0 -p IPv4 -i wl0.2 --ip-dst 192.168.1.0/24 --ip-proto icmp -j DROP , pcnt = 0 -- bcnt = 0 -p IPv4 -i wl0.2 --ip-dst...

yes, I have a pihole device, however, given the 1st guest network works, I see no reason why pihole is an issue with 2nd guest network.

Thanks for your reply. To answer your questions: 1. I didn't block internet connection to anything. I have the 1st guest wifi enabled and that can access the internet. 2. I have tried without time restrictions. 3. I rebooted multiple times. 4. The issue is with the router and the mesh nodes. I...

Router: RT-AX-88U Merlin Firmware: 3004.388.9_2 2 AiMesh ZenWiFi XD4 Pro I have 1 guest network on 2.4GHz for my IoT. I created a 2nd guest network on the 2.4GHz without a password, limited to 30 minutes, and disabled Intranet access. When I connect to this wifi network, I don't get internet...

Thanks for clarifying... sorry for the confusion. I moved the script back to /jffs/scripts/ folder.

Isn't that a folder? https://www.snbforums.com/threads/auto-wake-on-lan.89818/post-904442

Thanks. I made sure to use the MAC address of the NUC and did `chmod +x` to the file. Do I also need to chmod +x the `services-start` folder?

yes, and to be sure I logged in and I saw that the folder was gone. I think since the last Merlin fw update, this folder got deleted, which explains why that didn't work for me. I recreated the folder and the script: Note: I named the folder `services-start` - and not `service-start` - is that...

Manually it works. If I go to the router's Network Tools and select the MAC address, it will wake the device... so what's the difference if I do it via script?

So after having a power outage, the script didn't wake my HA server. I have enabled custom scripts in the GUI. Provided the right permission to execute the script. Used the MAC address of the device. What else could it be? Manually, the WOL works.

ok, so I enabled the JFFS partition and SSH'd to it. I used `nano` to create the script `wol.sh` and copied your example but used my machine's MAC address. I then issued `chmod +x wol.sh` That should be enough?

That would still work for me. How can I auto issue WOL every time it boots up?