Recent content by gocoax

Thanks for your feedback. I corrected the spelling error. Unfortunately, MTK's chip only supports two 10G ports, which is a bit limiting. If we really need to support 2.5G, we might have to use one of the 10G ports to connect an external switch chip. This would allow us to expand to one...

We've been exploring options and it seems that currently, only the Banana Pi BPI-R4 supports Wi-Fi 7 with OpenWrt. However, it appears to be more of a development board than a typical router. We're considering whether it's worth developing a Wi-Fi 7 enabled router based on MTK chipsets, that...

I found a new one. 8x10G, web smart. less than $200.

Got it. you can buy 2 switches, each switch has 8x 2.5G and 2x 10G SFP+ ports. That is maybe the best choice.

With changing the band filter, the normal MoCA adapter can run over 400-900MHz, as a MoCA Access CPE. The quesiton is, who want to use MoCA Access. Looks like more and more ISPs are moving to fiber.

For home, we think 8x 2.5GbE port + 2 x 10GbE SFP+ should be a good choice. The price can be about $100. Do you really need 16x 2.5GbE ports, that one should be much expensive. Maybe $500~$600

An interesting product. Why they don't use a MoCA adapter? Cheaper and can provide 2.5Gbps bandwidth.

We will try our best to provide more cost-effective products to the customer and we will provide best customer support.

We found many people asking for the MoCA 2.5 adapter with 2.5Gbps Ethernet port. Perhaps it is because MoCA2.5 emphasizes that it can support 2.5Gbps bandwidth. Today let me do more introduction about the MoCA bandwidth, and try to find out can we benefit from 2.5GbE Ethernet port. 1, MoCA...

Both can work for you.

Yes, the same

Yes, splitter is bi-directional. You can put the MoCA Adapter to one of the output port.

Please don't connect the DVR/TV to the TV port of our product. Because DVR is using MoCA. But the TV port has filtered the MoCA signal. Please use a two way splitter in the Family Room and Living Room to connect MoCA adapter and DVR.

Hello, I think you want to distinguish the WAN and LAN service with different VLANs over the same coaxial network. Sorry, the current MoCA chip is very weak. It only can pass VLAN traffics, can't do VLAN adding/Removing and Filtering. But We have another solution. You can use a pair of MoCA...

Looks like the performance is limited by the Computers. You know, some older computers can't get full speed.