What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by GSpock

  1. G

    Route traffic from Wireguard VPN clients through cloud VPN server

    Hi, I am running AX86U with 3004.388_9 with WGS to TorGuard enabled, as well as router WGS server activated. Just have made a test with my smartphone connected to the AX86U VPN WGS while having redirected WGS clients to the WGS of ToG (via VPN Director rule) and the smartphone correctly gets the...
  2. G

    RT-BE92U / 3006.102.4 Wireguard & VPN Director

    Hi, have a look here: https://www.snbforums.com/threads/route-traffic-from-wireguard-vpn-clients-through-cloud-vpn-server.94722/ Although different it seems related to your issue.
  3. G

    Struggling with access from main to GN3

    That is why I consider it overkill for what I try to do ...
  4. G

    Struggling with access from main to GN3

    Thanks. No, I just try to achieve one-way to GN3. I think installing YazFi is a bit overkill for this. I have made some tests on one old routeur (87U) and YazFi did not run very well but probably due to the routeur obsolescence.
  5. G

    Struggling with access from main to GN3

    at this time this is a rather "may not", but thanks anyway ...
  6. G

    Struggling with access from main to GN3

    I have not entered any of those ebtables rules, it seems they are generated when choosing to disable intranet access ....
  7. G

    Struggling with access from main to GN3

    Thanks, devices are connecting via Wifi Guest Network 3 .... so, in the same subnet as main, that's why I mentioned ebtables iof iptables, but I might be wrong. I searched the forum but could not find any usefull info to me.
  8. G

    Struggling with access from main to GN3

    Hi all, I am trying to have one-way access from main (192.168.1.0/24) to Guest Network 3 while access intranet is disabled. GN3 devices have the following IP's: 192.168.1.150, 192.168.1.151 and 192.168.1.152 ebtables -t broute -L BROUTING --Lx --Lc ebtables -t broute -A BROUTING -p IPv4 -i...
  9. G

    How to start Wireguard Server in ssh ?

    Many thanks @ColinTaylor , it works perfectly. And you are right there is "only" 1 WireGuard Server. Rgds, GS
  10. G

    How to start Wireguard Server in ssh ?

    Hi all, I am looking for the ssh commands to start and stop the Wireguard Server on my AX86U (like service start_vpnserver1, service stop_vpnserver1 for OpenVPN server). I did quite some search here and on google but could not find the answer at this time. Thanks, GS
  11. G

    OpenVPN Server log, is this in error ?

    Thank you @eibgrad For clarity, this is my set-up: main router is AX86U (192.168.1.1) sub router is AX56U (192.168.98.1), WAN port is connected to LAN port of AX86U AX56U runs OpenVPN Server1, TUN/UDP with "Client will use VPN to access" set to "LAN only" (excluded "both" for performances...
  12. G

    OpenVPN Server log, is this in error ?

    Thanks @ColinTaylor ; I realize that this is more complicated due to my set-up that I have not explained. Will review it, further test & come back if issue persists.
  13. G

    OpenVPN Server log, is this in error ?

    Thanks ! @ColinTaylor Nevertheless, despite the "route to 192.168.1.0", the (Win) client cannot see/access other 192.168.1.0/24 devices (whatever the setting LAN/Both on the server side). GS
  14. G

    OpenVPN Server log, is this in error ?

    Hi all, in the OpenVPN Server log file, I see the message below when a client is connecting: Aug 28 11:52:30 ovpn-server2[15443]: client/192.168.1.1:52551 SENT CONTROL [client]: 'PUSH_REPLY,route 192.168.98.0 255.255.255.0 vpn_gateway 500,dhcp-option DNS 192.168.98.1,route 192.168.1.0...
  15. G

    Asus Merlin 388.6_2 VPN-Director

    Switch the order of the rules.
See more
Back
Top
✖