Recent content by gundi

@ColinTaylor Brief info I found the error by chance and it's the Asus router even though it doesn't actually make any sense Disable UPnP and the connection is stable Here it was the same solution

That's correct so far... Draytek would like a PPPoe and PPP log.. But I think I've found a solution using TCPDUMP... I'll have to test it this weekend

Hello, since I unfortunately have to deal with PPPoE interruptions, I am in contact with Draytek. They would now like a recording of the data traffic from the WAN port.. Is something like this possible with the RT-AX5400?

I'm going to test VPNMON. I'm a newbie in this area ;)

OK, do you have an idea how I can tell my VPN connection to try to reconnect?

Hi, is there a trick how the reboot protection works if the Asus doesn't do PPPoE dial-up? Unfortunately I have problems so I let the Vigor do the dial-up and unfortunately the VPN no longer connects after the forced disconnection

For many people, the 167 seems to be running smoothly with Deutsche Telekom and 1&1... Here in the country he owns the Telekom line and 1&1 has only rented it

Hi me again :) I've now had the PPPoE connection made on the Vigor and everything seems to be running smoothly PPPoE uptime is 23 hours So my line seems to be running smoothly but the Asus has a problem with the PPPoE

YES, I will test it because the DSL sync remains, it is only the PPPoE session that breaks down Apr 29 19:56:40 kernel: br0: received packet on eth3 with own address as source address (addr:08:bf:b8:4a:0b:b0, vlan:0) Apr 29 19:56:51 pppd[9209]: No response to 10 echo-requests Apr 29 19:56:51...

I'm in contact with my provider and he said I should let the Vigor dial in via PPPoE... but then I have double NAT -.-

Unfortunately, I've only had this problem since I replaced a Fritzbox 7590AX with the Vigor and the Asus router

Nobody has an idea yet? I completely reset the AX5400 again and set it up again without importing a backup, unfortunately still 2-3 disconncets a day

Is 255.255.255.0 so /24

Hi, I just noticed that a few devices got an IP via DHCP but they aren't displayed in the web interface? Because of WAN problems, I reset the router to factory settings. Before that, I didn't notice the problem that devices weren't displayed to me And it shows devices that have not been on the...

Unfortunately the WAN connection is still failing and I don't know why... here's a log, maybe you can help me -.- Apr 24 20:41:32 kernel: DROP IN=eth4 OUT=br0 MAC=01:00:5e:00:01:bb:cc:50:e3:4f:fc:fb:08:00 SRC=10.10.10.108 DST=224.0.xxxxxx LEN=128 TOS=0x00 PREC=0x00 TTL=127 ID=50827 PROTO=UDP...