What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by Hakon_H

  1. H

    Can't get Private Internet Access VPN working on Merlin 380.60_beta2

    This is what fixed my issue. Change port back to 1194. And insert my old certificate Authority. Seems like the new certificate i downloaded was wrong
  2. H

    Selective Routing with Asuswrt-Merlin

    Hi just tried disabling "iptables -t mangle -F PREROUTING" in my script. Now traffic from specified pc is no longer using vpn! Have you done anything else?
  3. H

    Selective Routing with Asuswrt-Merlin

    Hi. I have tried both asus and merlin loopback with no luck.
  4. H

    Selective Routing with Asuswrt-Merlin

    Hello. I have a ac68u running firmware 380.57 and OpenVPN + PIA just fine. My problem is when VPN is running it kills the NAT loopback. I can no longer access my ddns adress from LAN, but there is no problem when not on home network. Is there a work around for this problem?
  5. H

    Need help making Peerguardian rules only apply specific pc

    Hi. I have the Peerguardian script found in the wiki installed and working on my AC68U. My problem is I only want the script to block one of my pc. I don't know even if this is possible but any help will be appreciated. The script: #!/bin/sh # PeerGuardian rules # Loading ipset...
  6. H

    Selective Routing with Asuswrt-Merlin

    When I enable DMZ in web UI I am able to connect to port 8080 and 11348. I think it has something to do with double nat
  7. H

    Selective Routing with Asuswrt-Merlin

    Thank you :) I can now connect to transmission and lighttpd web server on my router. I did this by adding "route-nopull" in custom configuration (router web ui) and leaving my router outside the "vpn_route_up.sh" script. My next problem is forwarding the ports 8080 and 11348 to 10.0.0.44...
  8. H

    Selective Routing with Asuswrt-Merlin

    PIA WAN Access Hello. Sorry for this post, but I have done a lot of reading and searching. I have Openvpn and Privat Internet Access up and running. Problem is when openvpn is running I can not access transmission or lighttpd server from wan. both running on my ac68u Can anyone please point...
  9. H

    Two things I would like to know how to do with MerlinWRT

    I have been looking for a solution to route only torrents this is what i have found. https://www.privateinternetaccess.com/forum/index.php?p=/discussion/3158/how-to-limit-routing-through-the-vpn-to-a-specific-interface-in-linux/p1 I have not tested it!!! seems a bit to much
  10. H

    [TUTORIAL]CHEROKEE web server through optware

    And the output:
  11. H

    [TUTORIAL]CHEROKEE web server through optware

    the file downloaded and installed fine, but still does not work. I started the tutorial from the begining and still nothing. This is what i get when running "cherokee-admin -b"
  12. H

    [TUTORIAL]CHEROKEE web server through optware

    Does not work. The output is: admin@RT-AC68U-93A8:/tmp/home/root# ipkg install gdbm Installing gdbm (1.8.3-4) to /opt/... Downloading http://nw-dlcdnet.asus.com/asusware/arm/stable/gdbm_1.8.3-4_arm.ipk wget: server returned error: HTTP/1.1 404 Not Found Nothing to be done An error...
  13. H

    [TUTORIAL]CHEROKEE web server through optware

    Thank you- attached is log from what you requested and also install log.
  14. H

    [TUTORIAL]CHEROKEE web server through optware

    Thank you for the quick reply. I have tried the tutorial and I am not able to access the the cherokee test page at 10.0.0.2:8008 witch is my router ip. any suggestions?
  15. H

    [TUTORIAL]CHEROKEE web server through optware

    Does this also work on Asus RT-AC68U?
See more
Back
Top
✖