Recent content by hellreturn

Seeing cyclic variation in ping. Wi-Fi card is AX200 with Asus router - AX6000 and AC-3100. Using 5Ghz.

Here is another link: https://app.screencast.com/gZvlfVslIL8I3 I wasn't running automatic speed test or anything on current PC when doing ping test. Trying to figure out what's causing the latency spikes in consistent pattern.

Sorry my bad. I ended up comparing my temp to 2.4 GHz radio = 50.5°C.

You must be in cool place.. cos i see this temps in mine: fanctrl_info = ; curr_cpuTemp = "59.262"; curr_rxData = fanctrl_info[3]; curr_coreTmp_2 = fanctrl_info[1]; curr_coreTmp_5 = fanctrl_info[2]; I agree with UI - that annoying red theme sucks. I feel my current AC-3100 as much better...

To add bit more info - my desktop has wifi 6 - AX200 card - ASUS mobo and intel Wifi chipset.

Recently got GT-AX6000... and updated firmware to latest ASUS one. I have only 2 devices connected on new one at present vs 45 on old AC-3100. I am seeing constant high ping which used to be like 5-10 ms on old one. Any thoughts on this pattern?

Is below good or something is messed up? Having problems lately so trying to figure out from where it's coming! Modem, router or PC.

Sorry if i wasn't clear - it could be firmware or new PC. Before I had old laptop which works fine no issues. Anyway i can figure out if it's PC or router?

Static IP under DHCP server. I only have 1 access point.

I didn't face any issues on router before but then i recently updated firmware. Disconnects + large ping spikes. Both are the problem. Latency goes to 600ms and disconnects are 1-3 seconds which happens every few minutes.

Is their anyway to resolve this? Router: AC3100 Firmwar: 384.16 Line 264: Apr 15 17:15:28 syslog: WLCEVENTD wlceventd_proc_event(420): eth1: Auth xxxx, status: 0, reason: d11 RC reserved (0) Line 265: Apr 15 17:15:28 syslog: WLCEVENTD wlceventd_proc_event(449): eth1: Assoc xxxx...

Here is big disconnects -

Nop. Router and desktop in same room just little far so can't use LAN cable. I am thinking to get 30 FT lan cable though. Smart connect is disabled as i force the connection of old devices on 2.4Ghz and rest on 5Ghz. my 5 Ghz setting - 2.4Ghz -

First thing, I did! I still have latency issues, so any help is appreciated.

Here is random disconnect -