Recent content by hike

Hello all, The list on the asus website with the USB 3G/4G USB modems are very old. Is there somebody using USB 3G/4G modems and do they work with the latest version of merlin ? (384.13) There are some topics, but also outdated. Maybe you can give me the model number so i don't buy a...

Sorry for the late response. I changed to Dual Wan Load balance and i can confirm everything you explained above at post #9 is working perfectly. Very important to set the prio specified in post #11 I noticed that the openvpn clients also have prio by itself, so client 1 is prefered above...

Do you intend to route ALL of your LAN subnet (typo? 192.168.0.1/24) via VPN Client 1 except for 192.168.1.1/32,'Machine 1' and 'Machine 2' ? If you do then you need to ensure that the rules for specific LAN devices are processed before CIDR ranges in the RPDB rules table. i.e. if the VPN Client...

Thank you for taking the time and always respond in this forum on people's questions and come with solutions :) I understand what you are saying about the Cold and Hot standby, i tried to do load-balance but i do not know how to change the ratio to 1:0 so that no traffic is going to the...

Hi, What i do to get the Secondary Wan from cold-standbye to hot-standbye is just disable and enable the connection. (sometimes i need to do this a few times because of DHCP fail) https://gyazo.com/678b08fc251cb16ed88d7805a9b7ffb5 After that i can bind openvpn1 to the interface, and that...

I checked the script you mentioned, i do not have WAN1 as a interface at the moment is hot standbye. (fail over) However i have a eth4 with a working connection to my secondary ISP as you can see in my previous message.

thanks for the reply ip rule : 0: from all lookup local 9990: from all fwmark 0x8000/0x8000 lookup main 10101: from 192.168.1.160 lookup ovpnc1 10102: from 192.168.1.240 lookup ovpnc1 10103: from 192.168.1.27 lookup ovpnc1 10104: from 192.168.1.183 lookup ovpnc1 10105: from...

Hi all i need some help. Dual-wan in fail over mode does not have wan0 and wan1, however if you disable and enable the secondary connection it goes from cold-standby to hot-standby. So i see on eth4 it recieved ip and gateway from my secondary ISP. This connection is idle all the time and do...