What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by Igor

  1. I

    Release Asuswrt-Merlin 3004.388.9 is now available

    Thank you! I've already checked it, everything works correctly.
  2. I

    mDNS on different subnets via VPN

    Yes, I added it. Later I saw that my Home Assistant from one network saw devices in another network. Then I analyzed the traffic again and saw the necessary packets, the format of which was different from what I expected. 192.168.2.1.5353 > 224.0.0.251.5353: <...> (Cache flush) A 192.168.1.183...
  3. I

    mDNS on different subnets via VPN

    Thanks for your reply! Unfortunately, I missed your reply, sorry. I added to the avahi-daemon.conf [Server] allow-point-to-point=yes I use the command cat /tmp/syslog.log | grep avahi to look at the log. I see the entries you specified from avahi-daemon on all interfaces, including tunnels...
  4. I

    Release Asuswrt-Merlin 3004.388.9 is now available

    Thanks, I think the problem is this: "Disable SHA-1 algorithms by default". I wrote to the author of the Home Assistant integration about the problem, but I haven't found yet how to temporarily enable SHA-1.
  5. I

    Release Asuswrt-Merlin 3004.388.9 is now available

    ASUS RT-AX68U fw 3004.388.9 Does the new dropbear have limitations? I'm seeing an access problem from the Home Assistant integration: Apr 12 09:04:13 dropbear[5255]: Child connection from 192.168.2.225:44326 Apr 12 09:04:13 dropbear[5255]: Exit before auth from <192.168.2.225:44326>: No...
  6. I

    mDNS on different subnets via VPN

    Two local networks on two routers are connected via OpenVPN. The routers have files "/jffs/configs/avahi-daemon.conf.add" with the following settings: [publish] publish-addresses=yes publish-hinfo=yes publish-workstation=yes publish-domain=yes [reflector] enable-reflector=yes After rebooting...
  7. I

    Release Asuswrt-Merlin 3004.388.8_4 is now available

    Ok, thanks. Why don't these messages appear after another reboot of the router? For example, the log is now clean. Is the problem in the USB modem?
  8. I

    Release Asuswrt-Merlin 3004.388.8_4 is now available

    USB modem is connected to the router. HUAWEI_MOBILE.
  9. I

    Release Asuswrt-Merlin 3004.388.8_4 is now available

    Sorry, I already have USB2.
  10. I

    Release Asuswrt-Merlin 3004.388.8_4 is now available

    I tried physically removing the flash drive from the USB. I did not try changing the USB3 mode to USB2.
  11. I

    Release Asuswrt-Merlin 3004.388.8_4 is now available

    https://www.snbforums.com/threads/asuswrt-merlin-3004-388-8_2-is-now-available.91069/page-5#post-919126 Rob90 Is there a solution? I have this problem occasionally. Restarting the router often helps, but not always. Jan 3 14:14:41 hotplug: add net eth7. Jan 3 14:14:41 hotplug: set net eth7...
  12. I

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    Thank you, I changed it. Is it possible to explain the cause of the problem? cfg_server: ! handling event in static chan case: (5g_1)wl1_chanspec:136u / (5g_2)wl2_chanspec: cannot select chanspec with the wrong info wl_chanspec_changed_action: Need to restart acsd due current 5G chanspec is...
  13. I

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    I have had this mode disabled for a long time.
  14. I

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    https://www.snbforums.com/threads/asuswrt-merlin-3004-388-7-is-now-available.89811/post-907176 @dev_null Diagnostics will continue until the router is rebooted. Occurs spontaneously, I can't understand the reasons.
  15. I

    Release Asuswrt-Merlin 3004.388.8_2 is now available

    Mon Aug 12 2024;10.8.0.3; <13>Aug 12 20:03:12 RT-AX68U-92A0-522207D-C wlceventd: wlceventd_proc_event(831): eth6: Radar detected Mon Aug 12 20:03:12 2024;10.8.0.3; <13>Aug 12 20:03:12 RT-AX68U-92A0-522207D-C cfg_server: cm_updateChanspec call wl_chanspec_changed_action Mon Aug 12 20:03:12...
See more
Back
Top