Recent content by invizib

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. I

    Bricked AC3200

    CFE> flash -noheader : nflash0.trx Reading :: TFTP Server. ..tftp retry wait 0 - last blk - Done. 21970944 bytes read Download of 0x14f4000 bytes completed Write kernel and filesystem binary to FLASH Programming...copysize=21970944, amtcopy=21970944 done. 21970944 bytes written I had to reboot...
  2. I

    Bricked AC3200

    CFE> show devices Device Name Description ------------------- --------------------------------------------------------- uart0 NS16550 UART at 0x18000300 uart1 NS16550 UART at 0x18000400 nflash0 AMD NAND flash size 131072KB nflash0.boot...
  3. I

    Bricked AC3200

    Yes, if I reboot it I get the same as the first post of this thread.
  4. I

    Bricked AC3200

    Hi, I managed to send to flash command this way but the result is the same. I can't send any commands after the firmware is uploaded. Done. 40398848 bytes read Download of 0x2687000 bytes completed Write kernel and filesystem binary to FLASH Programming...copysize=40398848, amtcopy=40398848...
  5. I

    Bricked AC3200

    Hi, this is what I get what I try to flash the firmware: CFE> nvram erase *** command status = 0 CFE> nvram commit *** command status = 0 CFE> flash -noheader : nflash1.trx Reading :: TFTP Server. ..tftp retry wait 0 Failed.: Timeout occured *** command status = -21 CFE> flash -noheader ...
  6. I

    Bricked AC3200

    Hi, I got my hand on a used AC3200 but I can't get it to work. Here is the CFE log I get if I connect to the router on serial port: CFE version 7.14.43.16 (r) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Thu Dec 18 12:49:55 CST 2014 (defjovi@localhost.localdomain) Copyright (C)...
Top