Recent content by Jadblack

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. J

    Mounting hdd on raspberry

    Thanks So can I put the mount command there? The same I used in the prompt?
  2. J

    Mounting hdd on raspberry

    Yes it works!!!! Eureka!! What’s the mount point now? How to make it permanently on reboot? Many thanks Very appreciated
  3. J

    Mounting hdd on raspberry

    # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not...
  4. J

    Mounting hdd on raspberry

    Hi thanks for your interesting. I append this to my smb.conf [Global] netbios name = Pi server string = The Pi File Center workgroup = WORKGROUP [HOMEPI] path = /mnt/family/Torrent comment = No comment browseable = yes writeable= yes valid users = user root create mask = 0777 directory mas k...
  5. J

    Mounting hdd on raspberry

    Sorry I add NTLM auth = yes But it doesn’t work Permission denied
  6. J

    Mounting hdd on raspberry

    Thanks Found this in log Can help? Global parameter client use spnego found in service section!
  7. J

    Mounting hdd on raspberry

    Thanks Do I have to enable NTLMv1 on the server?
  8. J

    Mounting hdd on raspberry

    hi guys trying to mount on a ASUS rtac68u with merlin firmware an external directory shared with samba running on raspberrt into my Lan. When I give the mount command ( mount \\\\192.168.1.100\\ShareName /cifs1 -t cifs -o "username=User,password=Pass") I stuck into a failure Permission denied...
  9. J

    Openvpn server and client vpn simultaneously

    i have an rt ac68u merlin firmware running a client vpn connected to a pay vpn service so all my devices are behind. On the router runs an openvpn server simultaneously that allow me to reach the LAN remotely by a openvpn client. Everything works fine but if the pay vpn is up I can’t access...
  10. J

    isp connection type with RFC2684 Bridged (dynamic)

    Ok sorry for my mistake. Nothing to do so I really wanted to waste the isp modem Thanks again
  11. J

    isp connection type with RFC2684 Bridged (dynamic)

    Tha Thanks actually there is a automatic procedure on isp site that explain how to get this working with the custom firmware... https://www.fastweb.it/myfastweb/assistenza/guide/asus-dsl-ac68u/
  12. J

    isp connection type with RFC2684 Bridged (dynamic)

    sorry i have an asus rt ac68 u with the latest merlin and my isp does want this configuration: VPI/VCI: 8/36 Protocollo: RFC 2684 bridged (dinamico) Incapsulamento: LLC DHCP client: abilitato DHCP server: abilitato NAT: abilitato i don't find any rfc 2684 to enable
  13. J

    isp connection type with RFC2684 Bridged (dynamic)

    Hello guys, i need help. My ISP Fastweb in italy use this protocol (RFC 2684 Bridged ip and i can't find this modality in the wan page. How can i set VPI 8 VCI 36. Many thanks
  14. J

    entware on partitioned hd

    yes, it is recognised on my ubuntu machine and auto mounted at boot or whenever i plugged it into Already tried and correct any corrupted block with fsck
  15. J

    entware on partitioned hd

    Unfortunatly device... i've tried this: mount -t vfat /dev/sda1 /mnt/Family/ -o rw,umask=000 mount: mounting /dev/sda1 on /mnt/Family/ failed: No such device and also this: blkid /dev/sda2: LABEL="OPTWARE" UUID="2fe16844-7542-429d-8d0d-a30acded9c18" /dev/sda1: LABEL="FAMILY" UUID="7697-9956"...
Top