Recent content by jata

Having said that 388.9 changes behaviour of aimesh connected device list and it now has all devices across all my APs. Not happy about that as it is screwing up how I have home assistant configured to tell me what devices are connected and where - but that's another issue

and you get a flashing light in the gui when there is an update and I can't help myself :-)

Thanks @agbommarito - hope all is well and thanks for updating these scripts for the community. I have updated to the latest script (guest network version) then updated my 2 APs (RT-AX86S and RT-AX58U) from 3004.388.9 to 3004.388.9_2 and all is working fine. So thanks again and much appreciated.

Hey guys. I thought I would try to help if I can. I have both a RT-AX86S and a RT-AX58U both set as APs using latest merlin FW (3004.388.9). I setup GN1 and GN2 as VLANs using this script a few months ago while on 3004.388.8. VLANs working correctly as is autodetection for both routers. My...

This is how I am now setup. Opnsense router with 3x asus AX routers as APs using the script to repurpose guest networks as VLANs. Working great.

I struggled with HomeKit and Apple devices and HomePods in particular for years using asus routers (not a Merlin issue). Built my own router using a minipc and opnsense. Run all my asus routers as access points. Now and finally everything just works perfectly all the time. It is night and...

Sorry missed this question. I have all my asus APs wired via the wan port (so eth0 on ax86u and eth4 on ax58u).

I have two Asus APs. One ax86s with wan on eth0 and a ax58u with wan on eth4. So I just updated the script to eth4 on the AX58U. All working perfectly across my network with 3x APs mixed Asus and UniFi. So thanks for sharing this. Works great.

Thanks. Typo. Spotted myself just now while looking through again. Now vlan working on both so GN1 and GN2. You mentioned above that RT-AX58 uses eth4 for WAN so I will work on this AP next using eth4 instead of eth0. Thanks for that info too. correct and working script below. #!/bin/sh #...

From my setup so far, I am testing a modified script on my RT-AX86S. I'll work on RT-AX58U after I get it all working. guest network 2 (called vlan3) is working and clients connecting to this AP/SSID are getting an IP address from my opnsense router. guest network 1 (called vlan2) with both...

Thank you for this. So the VLAN IDs are not hard coded in the Asus APs - that's great. I also have a RT-AX86S in my setup - totally forgot about it! This also does not have a 2.5g port so can I assume that both RT-AX58U and RT-AX86S have the same port configs? I will check using ifconfig...

Thanks. This is great work and I’m going to try it with my opnsense firewall with mixed UniFi and Asus APs. I already have my UniFi AP working with opnsense and vlan so I will just need to update this all to match the 100 and 200 tags. Is there a command I can run to see the port config of...

Agreed. I just got caught up in the aimesh marketing a couple of years ago when I should have researched better at the time and added APs rather than routers. I'm really pleased I looked into opnsense/pfsense. I hadn't even thought that it was possible to build my own router / firewall on x86...

That is good value ($130 here in oz through amazon) but I wanted to use unifi as I already had a unifi switch. I bought a unifi U6 mini that has similar specs to the omada and I got it for $170 oz on amazon so similar price.

Thanks for the update. I have accepted that scripting vlans to APs (or nodes) is just too tricky to setup and maintain. I agree with @Tech9 regarding APs v mesh nodes but sometimes you have no choice if you can't get a wire to an AP. The other thing I have decided is that using 'routers' as...