Recent content by jca001

  1. J

    Cannot access 10.0.0.1 from PC

    Just a follow up on some of my test. As I stated earlier my Company VPN works fine through the double NATing. I did sveral speed test from different URL and selecting different server too, and all show between 28-31 DL and 4-6 UL speeds. If anybody can think of some other test I should do let...
  2. J

    Cannot access 10.0.0.1 from PC

    Jegesq: If you know comcast, you know how hard they are to deal with. I had an old DOCSIS 2 modem for data and voice with no router. The battery died and they wanted me to pay to replace it, which I thought was wrong since I was renting the modem. So I did nothing for about 4 months. Then I got...
  3. J

    Cannot access 10.0.0.1 from PC

    Thanks for the information about setting up a static route. But it does not look like I will be needing that now. I have been doing more research and per some forums it seems the modem/router does not work very good in bridge mode. So I did a factory reset on the the modem/router and it...
  4. J

    Cannot access 10.0.0.1 from PC

    Thanks for the reply. When I was using the RT-N16 it was running DD-WRT and using 192.168.1.X on the LAN side and I was able to access 10.0.0.1 from my PC which had an IP Address of 192.168.1.101. I know there are differences between the firmwares and was why I gave the history, which...
  5. J

    Cannot access 10.0.0.1 from PC

    Hello: First a little history. Comcast forced me to replace my cable modem with a TC8305C because the one I had was end of life. This one does VOIP, 4 port router and Wi-Fi. The router LAN address is 10.0.0.1 and does NAT by default. This caused problems with my RT-N16 router that was also...
  6. J

    firmware restoration rt-n16

    Thanks for the information. After reading the link you provided I did the following: In DD-WRT I installed ASUS generic N16 FW. The router rebooted and came up on it. So then I was no longer running DD-WRT. Then I used the Admin FW upgrade option there and installed asuswrt-merlin and it...
  7. J

    firmware restoration rt-n16

    Thanks for the reply. Well I tried it again and let it set for over an hour and it never rebooted. The power light was off and port 1 light blinked now and then because of activity on the laptop I have connected to it and that is the only connected, no other cables at all. While waiting I...
  8. J

    firmware restoration rt-n16

    I have a rt-n16 that I installed DD-WRT on and now I am trying to install Asuswrt-Merlin on. I download the Asus Utility and the lastest Asuswrt-Merlin files. When I run the Firmware Restoration and hold the reset button and power on the route the power flashes slowly as it should. In the...
Back
Top