Recent content by juanantonio

I've been using this one for years with zero issues on my RT-AC86U -> ZTE MF833U1

For me, GUI wasn't very helpful. I had to do all via CLI. For that, the best way for setting up WG client/server was to follow this guide -> ZebMcKayhan / WireguardManager Greetings

The same here, I am delighted to have dual stack avialable. I even have redirected IPv6 addresses to my Wireguard server following the excellent guide of @ZebMcKayhan and @Martineau Wireguard Session Manager!

I've been using no-ip.com for a while with no issues. Last black friday I saw a discount on the price and I went for it, so as to not having to renew manually the name reservation as needed on free account. Greetings.

I faced recently this problem, as a result of being using @Martineau Wireguard Session Manager. I had several kernel crashes, with the correspondant awful log messages. In the end, I moved to router's own Wireguard client, with zero issues. I have HW acceleration enabled on my RT-AX86U, which...

As long as my home assistant mobile app can connect to my server, I'm more than satisfied and I have no intention of disabling rp filter, whatever it can be.

Certainly, that is my wireguard client's ip, it is showed by ipconfig command's output: juanantonio@RT-AX86U-6C38:/tmp/home/root# ifconfig wgc1 wgc1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.151.13.172 P-t-P:10.151.13.172...

Well, I did as you suggested, but the output on syslog.log doesn't mean much for me, here it is: Dec 24 13:26:25 kernel: IPv4: martian source 10.151.13.172 from 193.176.87.164, on dev wgc1 Dec 24 13:26:25 kernel: IPv4: martian source 10.151.13.172 from 37.186.4.16, on dev wgc1 Dec 24 13:26:26...

Good afternooon everyone. I needed opening port 8123 on my RT-AX86U. I did in the way I already have more than a dozen open ports, which I learned from @ZebMcKayhan , (Thanks mate!). The thing is: The port shows as open on https://www.connected.app/port-checker, as seen on image: Also, the...

Thanks for replying, @BadKarma . First of all, luckily my 2.4GHz is working again. In my case I had to disconnect my old USB pendrive which hosted Entware and all the stuff included in it. After disconnecting a two-fan accesory bought in AliExp...., and connecting it in some other USB port...

Morning. Excuse me, but I cannot determine what was the solution to the issue. As I have been facing the same problem, let me ask you, please. Was removing the USB M.2 attached to to your router which brought to live again your 2.4GHz Wifi? Thanks.

Morning. You don't provide info about your firmware or model router. In my case, I solved the issue going to LAN -> DNS Director, and tweaking there my own preferred values. As you can see in my signature, I'm using Asus Wrt Merlin. Regards.

I only wanted to say that ASUS Wrt Merlin running on my router, which was used to do some test, is version 3004.388.8_4

Ok, here is the output: juanantonio@RT-AX86U-6C38:/tmp/home/root# ip -6 rule add from all lookup main suppress_prefixlength 0 prio 10000 juanantonio@RT-AX86U-6C38:/tmp/home/root# ip -6 route get 2600:: from 2a0c:5a80:4806:f600:d54f:93c:2f4a:a6e iif br0 2600:: via fe80::1 dev ppp0 metric 0...

Okay. First I deleted all my ip -6 rules (I had to add by device and not by prefix, only to get my Google Nest working). juanantonio@RT-AX86U-6C38:/tmp/home/root# ip -6 rule 0: from all lookup local 32766: from all lookup main juanantonio@RT-AX86U-6C38:/tmp/home/root# After running...