Recent content by Kaver163

I would maybe install 386.7_2 and do a full reset and see if the problem also occured on that firmware as 388 seems not to be as stable.

Thanks, I was hoping it could avoided to have to shield the units somehow but I guess not. I'm have connected both a USB3 stick running Entware and a USB-harddrive so will have to check whether it's sufficient to shield the USB-stick (by using a cable, etc.) or if both devices has to be shield...

I tried to downgrading from "performance" to "good" on my AX86U and unfortunately it didn't help - my 2.4 ghz wifi still disappears when using USB3-mode.

Thanks for this info, it also came out of the blue on my AX86U.

USB mode can be changed in different places, but generally under Administration/System/USB setting.

Have you tried to switch the USB ports from USB3 to USB2 mode? I also had an issue with 2.4 ghz disappearing but it came back after doing this change.

@cap33444 I have been going back and forth between Asus and Merlin firmware on my AX86U using router mode a lot of times with full resets trying to get my internet connection stable using many types of settings (including DHCP normal and continuous modes) but with no luck. If I connect a...

would it be possible to set your AX88 to run in access point mode instead of router mode? If so you might try that, in my AX86U setup that works, while using router mode (in a double NAT setup) the internet connection is not stable.

I didn't mention I also tried setting DHCP query frequency to normal which also didn't help. I have to use Merlin software as I use some of its special functionalities so it's not an option to switch away from it. Will just use the Chromecast via LAN until it's hopefully fixed. Anyway thanks a...

@Rizm1989 on my AX86U using all recent firmware (Asus and Merlin) I am getting internet drops as soon as my Chromecast Ultra connects via wifi. I tried connecting the Chromecast Ultra separately to the 2,4 ghz and 5 ghz bands, did all kinds of resets, different SSIDs and the internet in any case...

@Buontinh , just wanted to let you know that I also have issues using NFS with an Oppo on beta 4 (from your post it doesn`t sound like beta 5 will change that). I have a Oppo 203 connected to a AX86U where NFS gives stuttering with high bitrate files, while using UPnP media server works smoothly...

Yes at first I wasn`t so happy with it as I also had some stability issues but after having now installed Merlin beta 4 these seem to have disappeared and speed, range, etc. is great, etc. so would like to stick with a (silent) AX86U ☺

@dfunked - thanks for your feedback; yes could be coil whine. Fortunately I have 50 days to return it.

Hi, I have just bought a RT-AX86U which runs great but it does when using the 2,4 ghz band make high frequency electrical noise that I can hear several meters away. Since I have it in my living room it is distracting. When switching off the 2,4 GHz band and only using the 5 ghz band the router...