Recent content by Leon44
-
Lan to Wan connection doesn't work , need help.
In the technicolors main settings there is the "Internet Access" section which is the dsl's sync settings as stated before DHCP routed mode,PPPoE routed mode,Fixed IP mode etc.... It just let you disable this entirely which i did and it leaves a message of "PPP disabled" , then i used my PPPoe... -
Lan to Wan connection doesn't work , need help.
I did connect them finally , just the Technicolor is the primary router and Asus the secondary. The technicolor is working only for the phone with internet access disabled and the Asus is making a connection by PPPoe. The good news is that with the Lan to wan connection the Asus kept its Qos... -
Lan to Wan connection doesn't work , need help.
Bandwidth limitation is a type of QOS , i have limited most devices to 25mbps download so even if 1-2 of them are downloading the internet connection will still be responsive and suffice for everyone else + i have set to have the absolute priority anytime. Just imagine that sometimes i see 10+... -
Lan to Wan connection doesn't work , need help.
I start to believe the same as telephony codes are locked into it even after reset , i would just get a cheap ATA voip adapter like a Cisco spa112 but it seems that i will still need the codes that they just dont give for "security reasons". -
Lan to Wan connection doesn't work , need help.
This is one of the guides i followed! Dont know why it doesnt work. -
Lan to Wan connection doesn't work , need help.
Swapped cables with a utp cat5 rebooted but same issue , will try again tomorrow by reseting the asus cause i reseted the technicolor more than 5 times today.... feel kinda desperate cause phone must be working but their modem/router is unnaxceptable. -
Lan to Wan connection doesn't work , need help.
Yeah , flawless at the moment we speak i am using my main pc connected with an ethernet cable , tried all 4 of them and works just as good! -
Lan to Wan connection doesn't work , need help.
After rebooting in DHCP mode the internet led is turned completely off , in the routers setting i get only a "connecting" message , nothing else. Ip address and other readings are empty. The router is this one: TG789vac v2 I found also its instructions in english here... -
Lan to Wan connection doesn't work , need help.
I have these 3 options in the Internet access section : 1) DHCP routed mode 2) PPPoE routed mode 3) Fixed IP mode Tried the DHCP mode but didnt work also tried the PPPoe mode with PPP disabled , does this mean its not supported at all? -
Lan to Wan connection doesn't work , need help.
Hello mates , Yersterday i upgraded my internet/phone package from 50mbps to 100mbps but Voip is forced from now on and my dsl-ac68u does not support it right away but has sip passthrough support. Also my provider doesnt give the telephony codes so even if it was supported i couldnt use it...