Recent content by M4tt

By using tcpdump and setting the firewall dropped packages and odhcpd6c to verbose logging, I was able to fix the issue by putting the following two rules into /jffs/scripts/firewall-start: ip6tables -I INPUT 1 -i eth0 -p udp --sport 546 --dport 547 -s fe80::/10 -d ff02::1:2 -j ACCEPT ip6tables...

I'm using a GT-AX11000 with Merlin version 3004.388.7. After updating my modem's firmware, my router suddenly stopped getting an IPv6 address. Initially, I thought the modem was to blame, but I have now found out that the built in IPv6 firewall of my asus router is blocking the DHCP request...

These are the IPv6-specific settings of my NR7101, which look fine to me (and work with Windows connected directly). Maybe that helps? The Mac-Address set below is the Mac-Adress of my Asus-Router (naturally I set that to dynamic when testing with Windows-clients connected directly):

My GT-AX11000 gets a public IPv4-Address I can connect to via OpenVPN etc (as NR7101 is set to IP-Passthrough, which works fine on Windows with v4 and v6 but only with v4 on my AX11000).

Unfortunately, that doesn't fix my problem. It still works neither in native nor in passthought mode

When I connect my Windows systems, I get public IPv6-Adresses. IPv6 doesn't work in native as well as in passthough mode, my provider is A1 Austria. I think they support prefix delegation, as they mention providing a /64 subnet to endusers, but I'm not totally sure. I'm not using an "extra"...

I'm running a Zyxel NR7101 Modem with 5G connection in IP passthrough-mode with IPv4/IPv6-Dual Stack and an Asus GT-AX11000 on 386.7_2. When connecting one of my two laptops or my PC, all runnig Windows 11, directly to my NR7101, they get an IPv4 and an IPv6-Address, so I assume, IPv6 should...

Hi! I'm running several RT-AC66U and RT-AC68U at different locations. Until approximately 1 1/2 to 2 years ago I was able to just connect to every location over OpenVPN (every router runs an OpenVPN server) and update the routers firmware as soon as an update was available (I don't remember the...

Since I upgraded my RT-AC68U to 378.50b2 I have an issue with my 2.4Ghz Wifi: If I set "Wireless Mode" to "Auto", my Macbook Pro (Late 2013, Yosemite 10.10.2) only connects with 11MBit/s. When I set it to "N only", I get 217 MBit/s. I am sure this is not related to my settings. When I do a...