Recent content by MayBe

How say Ranger802004 - table 101 - incorrect, in my case wgc1 -> table 1 (/etc/iproute2/rt_tables)

I added default route, and all works, thx, BUT rule unreachable still re-added, its normal or need something to edit? - my rules: ip rule add fwmark 0xa000/0xf000 lookup 101 prio 6000 ip route add default via <vpn_gateway> dev wgc1 table 101

https://github.com/Ranger802004/asusmerlin/issues/66 I have same issue on 3006.102.4_beta1 on AX6000, how to fix it anybody known?

Question: Can I add IP manualy in CIDR format? like 123.123.123.0/24 If so, how will it be done correctly? "Policy domaintoIP File under /jffs/configs/domain_vpn_routing/. Add using the following syntax Domain>>IP"

Same situation, ip route add xxx.xxx.xxx.xxx/24 via xxx.xxx.xxx.xxx dev iface_name - works without slow down on main network

In my case, when I enable the rule for the VPN tunnel in VPNDirector on my GT-AX6000 with 388.7 When only lan LAN traffic (not related to any tunnel), the local speed drops to 1 Gbps with a frenzied load on one core at least 100%. I have a 2.5 Gbps NAS and a Wi-Fi client with a 2400 Mbps...

Someone can test it in this release. VPN Director, when enabling custom routing rules for the WG tunnel, disables offloading for traffic between WiFi and Lan clients (limits it at 1Gb\s, puts a full-load on the one CPU core) LAN - WiFi, not VPN-LAN traffic Or is this the specifics of VPN...

In my case, when vpn director turned on for wg tunnel, it will affect the speed of the Wi-Fi network, not even along the route, simply loading cpu core 0, when copying a file from one device (wifi 5g client) to another (lan5) ( 50.3 and 50.5 for example) seems like nat acceletation off globaly...

And i Find bottleneck. This problem only occurs if you enable a route in the VPN director for one of the VPN subnetworks like main network 50.0/24 , in the VPNdirector add route like 0.0/24 for WGC1 And after this steps CPU core 0 - 100%load (with process bcmsw_rw) when copy files from 50.2 to...

Do it on next weekend, and post result here

reflash GT-AX6000_3004_388.4_0_rog_nand_squashfs, without factory reset after STOCK initialize amtm, installed domain based script, time keeper (like BEFORE) speed 200, load - 2-5%

On STOCK firmware (9.0.0.6_102_33874) - i download file from NAS with cap of speed 200MB\s without any CPU load (max - 7% on core 3) And 200mb - ITs normal for 2400 link speed wifi, not 100MB\s and CPU-core 100% try re-flash Merlin

Hello everyone! Have one issue after update network adapter on NAS with my config. 1. GT-AX6000 \ Merlin 3004.388.7 2. NAS with tp-link tx201 ( rlt 8125) 2.5G 3. PC with 2.5G lan / AX210 WiFi If I connect NAS directly to PC by cable - negotiation speed 2500, fd, download speed from PC to NAS...