Recent content by MDA

The restore tool wouldn't work for me either, but the mini CFE server (in a browser) at bootup worked. I recently went back to Asuswrt-merlin on my AC66U-B1 as the latest DD-WRT builds are having some functionality issues right now and I haven't used merlin's in a couple years (Asuswrt didn't...

A late response, but I've been tinkering with this issue and I would say that it works as designed knowing the CTF bypasses iptables and such. My UNREPLIED's go away after the timeout and new ones pop up like when I open a game that has UDP ports. I would say its working even though CTF is...

That is definitely bricked (due to corrupt CFE?) because if the mini CFE upgrade server in between bootup and firmware loading can't be accessed (by your video, no LAN or WLAN activity and recovery mode is essentially booting to mini CFE server), then there is no way to flash over a bad flash...

One would have to modify an RT-AC68U CFE with their TM-AC1900's MAC addresses and flash the CFE over the TM-AC1900's. I did it a month ago and it worked perfectly. Not sure, but if someone flashed to merlin on a TM-AC1900 without CFE flashing, then they are still locked on the 667mhz DDR3 (which...

As for the RT-AC68/TM-AC1900 and DD-WRT, its not worth the hassle as the similar Broadcom ARM-based routers (R7000 and AC68U AFAIK) have drivers in current builds (since 24345) that makes them reboot every 2~ hours. I hopscotched from Merlin to TomatoUSB to DD-WRT in search of functional...

Beacon Interval could help going from 100 to 50. Other than that, a less-crowded channel and line of sight is all you can improve.

I understand what you are saying. Last night I went from 376.48_1 to Tomato/shibby and finally settled on the latest Kong build for DD-wrt (25580M). What I was really looking for is a working bandwidth limiter. Not the entire QoS classification system to be exact because I don't care that if I...

I have a different experience and I've noticed a couple others do outside the asuswrt merlin forum. It does not matter if I enable or disable Level 1 CTF on my TM-AC1900/RT-AC68U using 3.0.0.4.376_2827 as a TM-AC1900 or using Merlin's latest 3.0.0.4.376_48_1 (being a TM-AC1900 with modified...

I too have been noticing this issue with my TM-AC1900 (T-Mobile RT-AC68U variant) on the stock 3.0.0.4.376_2827 firmware for that device and are using Merlin's 3.0.0.4.376_48_1 after using modified RT-AC68U CFE. This is important though as a lot of cable and DSL connections more apparent source...