Recent content by michel30

Backhall Normal Wifi used for all equipments: No problem since I used these setting for a long time now, also with the latest firmware no issue.

Hi, No I don't use reboot and everything runs perfectly with Firmware: 388.2_2_0-gnuton1

And did you also try the Firmware: 388.2_2_0-gnuton1 ? Since I using this one and the right settings my wifi stays stable no issue.

My settings was stable, I also set up my router now like this and I must say it is still stable ( or better performing ) than my settings in the passed. I still using the Firmware: 388.2_2_0-gnuton1 . Thanks for share these settings.

Do you want the original or the custom firmware https://github.com/gnuton/asuswrt-merlin.ng/releases/tag/388.2_2_0-gnuton1 and choose the right firmware for your routers.

If you have no issues, Don't upgrade...

I used this now more than 31 days : https://github.com/gnuton/asuswrt-merlin.ng Since it is set up like this no problem anymore everything stays on green.

Huh, You need to download the firmware from gnuton site on your local computer. Than login in your router and click on administrator and firmware upgrade. Upload the firmware and wait. When everything is rebooted you can a reset or factory reset with switch off your router, hold the wps button...

Yes, that is one for your ZenWifi router.

https://github.com/gnuton/asuswrt-merlin.ng and select the right firmware otherwise you will brake your router. So double check that you download the right firmware for your router.

Is a litle bit unclear? this message. but you could try the firmware from gnutons 388.2_2_0-gnuton1 since I used that one it goes okay.

Since I using the latest gnutons 388.2_2_0-gnuton1 and with backhaul settings like this Control Channel 100 and Channel bandwidth 80 MHz. I have no issue anymore, more than a week stable network and also the mesh wifi works perfect. This is how is should be, I don't no why it did not work in...

Huh. That is strange. And what happens if you do a factory reset? Swith off the main router, hold the WPS button under the router. Power on the router but ( still hold the wps button in ) the lights will blink couple of time. When the lights does not blink, power off, and boot up. Do this also...

Since I used this Stable: 388.2_2_0-gnuton1 Latest and with backhaul settings like this Control Channel 100 and Channel bandwidth 80 MHz runs my mesh wifi perfect it stays on green no issues. Everything is online for now: 2 days 14 hour(s) 2 minute(s) 36 seconds so hopefully it stays like this.

I'am start since last night to using: Stable: 388.2_2_0-gnuton1Latest I set my backhaul Control Channel 100 and Channel bandwidth 80 MHz I had a couple of times that the backhaul was blicking blue and all connection was lost with main router. hopefully this will fix all my problems and...