What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by MTD

  1. M

    Random Reboots Post 374.41 (Merlin build)

    Sure. Again - I'm not really sure what I'm looking for here or how to read this log with too much efficiency. Let me know what you see. Thanks!
  2. M

    Random Reboots Post 374.41 (Merlin build)

    Update on Router Reboots - I'm getting pretty consistent stability out of the AC66U now. My only issue is, the router reboots every three days. I don't have it down to the exact minute, but it consistently resets once between day 3 and day 4 and is 100% up in-between reboots. Any suggestions?
  3. M

    Random Reboots Post 374.41 (Merlin build)

    Hello All. After almost 3 days of uptime, the router rebooted. HW Acceleration, Samba, and DLNA were turned off. Usually I clear the log once I get the router up and running to make it easier to see any changes. Strange this is, when the router reset, I went from ~100 lines in the log to...
  4. M

    Random Reboots Post 374.41 (Merlin build)

    I have not yet, but will try if the router resets. I did not even pick up on this in the log - thanks! Right now I've disabled the samba share and DLNA in addition to the hardware acceleration. So far I'm 22 hrs and counting. My record is 3 days so time will tell!
  5. M

    Random Reboots Post 374.41 (Merlin build)

    I just reinstalled Asus Merlin on my router (did the factory reset and hard reset after installing new firmware), and disabled the Samba and DLNA share on the router. About 2 hours later, the router rebooted (HW Acceleration NOT disabled) See attached the log for reference. Now I'm going to...
  6. M

    Random Reboots Post 374.41 (Merlin build)

    Is it the upnp telling the router to reset or is it a function of the "rc_service?" I'm not clear on what the log is telling me, but is that even possible (i.e. another device having the capacity to tell the router to reset via the upnp protocol)?
  7. M

    Random Reboots Post 374.41 (Merlin build)

    No USB devices installed. I do have a Synology NAS storage unit connected via ethernet cable with a static ip.
  8. M

    Random Reboots Post 374.41 (Merlin build)

    I've tried disabling HW Acceleration as well as disabling UPNP but had no luck. The router will still reset about ever 2 - 3 hours or so. The 374.41beta 1 provided the longest uptime at almost 3 days before the same thing happened. The HW acceleration was "on" during that time as well...
  9. M

    Random Reboots Post 374.41 (Merlin build)

    Asus Merlin Help I've also been having issues with my RT-AC66U rebooting with both Merlin and Asus Firmware Builds. This has been ongoing, as I've tried each firmware as it releases only to conclude in the same result. When I run Tomato (shibby) on the router - it runs rock solid, however I...
See more
Back
Top
✖